MOOME MUX-HD: HDMI/DVI REPEATER
Don't replace your expensive Plasma/LCD/DLP TV or
digital projector! You can now experience up to 1080p FULL HD from
Blu-ray, HD-DVD, and other digital sources! No more black screen! Don't be stuck watching
HD at only 480p!
Pre-order
today:
$285 USD
Click to pre-order direct from manufacturer.
Will ship in February 2008.
Free
shipping to anywhere in the world included! |
The MUX-HD allows you easily add digital devices to any display
with a DVI or HDMI input such as an older PC monitor, HDTV/Plasma TV or
digital projector.
By using the MUX-HD you achieve the cleanest digital path from
video sources to your display as you stay digital all the way. Two Toslink
digital audio output are also provided to allow you to feed up to 7.1 channels
of audio to your A/V receiver or preamps. The MUX-HD is the ideal product for
connecting multiple HDMI sources to your digital display!
Specifications:
-
INPUTS: 4 HDMI inputs
-
VIDEO OUTPUTS: 1 HDMI and 1 DVI-D output.
-
HDMI 1.1/1.2, HDCP 1.0/1.1, DVI 1.0 compliant.
-
AUDIO OUTPUTS: 2 Toslink (fibre optic) digital sound output
from the HDMI inputs. This can output compressed 7.1 channels or
uncompressed 2 channel PCM.
-
Supports *any* resolution from 640x480 up to 1600x1200, including
all the popular resolutions such as 720p, 1080i, 1080p, etc. (Any
resolution and refresh rate up to 165Mhz pixel clock is supported).
-
DTV mode support (480p, 576p, 720p, 1080i, 1080p) for 50 and
60Hz
-
PC mod support (VGA, SVGA, XGA, SXGA, UXGA) up to 165Mhz
Supports 4:4:4 RGB / YCbCr (digital component) Input
-
Supports 4:2:2 YCbCr (digital component) input
-
Supports both 16-235 and 0-255 colour range and auto selects
correct value
-
Able to drive cables up to 10 meters (approx 33 feet) in length
-
IR remote control for input selection
-
Manual selection of input port available too
-
Metal case providing a clean electrical environment for high
definition content processing
-
Global power supply (100V-240V)
Installation takes 5 minutes!
Reviews/Testimonials
"Moome has been kind enough to send me a pre-production version of the
MUX-HD Repeater. It works perfectly. I have had up to 4 inputs connected to it
(a Sony BDP-S301 Blu-ray player, an HTPC, a beta version of the Lumagen Radiance
HD video scalar, and a Sony SAT-HD300 ATSC/NTSC/DirecTV tuner). The BDP-S301 and
Radiance scalar output HDMI. The HTPC and ATSC Tuner output DVI. For these later
two inputs I am using HDMI to DVI cables. The DVI output of the MUX-HD Repeater
is fed directly to the Analog Way DVX-8022 BlendZilla blender/scalar/switcher
(which has one DVI input). The HDMI output of the MUX-HD Repeater is fed to a
Convergent Design nanoConnect HDMI to HD-SDI converter. The output of this
converter is fed directly to one of the two BlendZilla HD-SDI inputs. I have fed
the MUX-HD Repeater 1080P/24 (from the Sony BDP-S301), 1080P/60 (from the Sony
BDP-S301, Radiance HD, and the HTPC), and 720P/60 and 1080i/60 (from the ATSC
Tuner), and the MUX-HD Repeater has handled all of these input
resolutions/refresh rates perfectly. I have not seen any errors introduced
by the DVI/DVI Repeater. Yesterday I watched a series of football games in both
720P/60 and 1080i/60, via the Sony SAT-HD300 ATSC/NTSC/DirecTV tuner. Not a
single instance of vertical motion tearing in any broadcast, with the exception
of one commercial. The 12 foot wide blended CRT projected image was sharper,
with more vibrant colors than I have ever seen in any TV image. It was like
watching a 12 foot wide direct view CRT tube. So the results to date are:
720P/60 and 1080i/60 do not result in vertical motion tearing, whereas 1080P/24
does." - William
"We had a chance earlier today to check this unit out. We did not get to try
the switching, but did get to send both 1080I and 1080P through the first input
on the unit, and we also tried 1080/24P. We looked at both DVI out and the HDMI
out. We ran the DVI out directly into the Diventix 8022 DVI input. We also had
the HDMI out going into an HDMI to HD-SDI converter. Both work exceptionally
well. Without the unit we would not have been able to connect directly into the
8022 or the converter. We had a Blu-Ray player on the first input of the unit. I
was surprised how well the DVI to DVI connection from the unit to the input of
the 8022 performed. It was a excellent. The HDMI into the HD-SDI is even
better... Another product very very well done! Two thumbs-up!" - Mike
Parker of MPmods.com (Video display guru)
BUY NOW »
Need more information? See the MUX-HD FAQ!
Visit the VIM-HD Discussion/Support Forum
Questions should be directed to the PJI-HD company (Moome) at:
moome@curtpalme.com
