Transcoders
Audio Authority has now
discontinued the 9A65 transcoder
that I was selling in the past.
I’ve got a couple of these units
left, but have switched to the
much more versatile AA 1365
model. This unit has no
compatibility problems with any
component source, and actually
is a mini scaler, capable of
outputting up to 1080p from a
component source. The unit has
on screen menus, control over
the drive levels of each output
(R, G, and B), has internal
color and tint controls, and can
also act as a reverse
transcoder, (RGB input to
component output). The pricing
is a bit more expensive than the
old transcoder, but at the added
features, they are well worth
the price. Also note that the
transcoder comes with a short
(1’) SVGA to 3 RCA cable for the
component connection, and a 2’
SVGA to SVGA cable for the
output. See
here.
Accessories
I’ve now got good stock of
short (5’) good quality SVGA to
5 BNC breakout cables. At $25
USD, these molded cables are
usually stronger than custom
made cables with that flimsy
SVGA end soldered on. I then use
BNC to BNC couplers to couple
these to custom made BNC to BNC
cables (also now on the site
here).
Projectors, projectors..
I am not featuring any sets
specifically this time around.
I’ve got many new sets in , all
makes and models, so I’ll simply
update the entire list of
projectors, with a ‘new’
designation on the new arrivals.
I have reduced pricing on the
entry level on all Sony 10XX
sets (with the exception of the
1001 that’s a later model) to
$300 USD. Now EVERYONE can get
into a CRT. I won’t be bringing
in any more Sony 10XX series
after this, but still will
support them for a long time.
There’s a bunch of new NEC
sets on the list. I managed to
pick up 16 of them for low $$,
but most of the cases have some
gouges or scratches on them. No
cracks or plastic chunks
missing. The tubes are in great
shape though. That means yet
more price reductions!.. :)
Also new on the site are the
high end hard to find NEC
ISS-6010 switchers. I’ve got
them listed as complete units or
individual boards for those of
you that already have these
switchers and just need modules.
I’ve got about 10 of these
switchers left.
Parts n' stuff
I am adding parts to my stock
daily. I seem to be one of the
only places left that can repair
virtually any CRT module down to
a component level. With some
other casual resellers now out
of the business, rest assured
I'll support ANY CRT projector
out there, whether purchased
from me or not.
Parts needed
I am looking for a few parts
that I'm willing to buy or trade
other stuff for:
(2)
P19 green tube in an 8+
condition. Again, hardware is
not important, I can swap that
out.
(2) Ampro 2000 style remotes.
I've got a need for two good
working old style Ampro remotes.
I've got lots of sets but few
remotes.
Thanks for your support!
Curt
