| Author |
Message |
d.gramophone
Joined: 22 Jan 2012
Posts: 5
Location: France
|
| Posted: Sun Jan 22, 2012 12:30 pm Post subject: code error 08 on 1292 |
|
|
 Hello, I live in France and I have Sony tritubes for years. Excuse my english it is not perfect.
During the last month, I went on a new house with my 1292 and after a hour of trimmings the 1292 stop with the message 08 error (v stop), do you know what it means for the électronician that came fifteen days ago and go again the next saturday with a oscillator. He spent two hours on testing transistors ans alimentations on the cards, with the dc card, and not find what is wrong.
The 1292 start and two seconds after, fail.
Thank you if you know what hapen and tell to me!
Daniel.
|
|
| Back to top |
|
 |
HaydnG90
Joined: 22 May 2006
Posts: 1356
|
|
| Back to top |
|
|
d.gramophone
Joined: 22 Jan 2012
Posts: 5
Location: France
|
| Posted: Sun Jan 22, 2012 3:41 pm Post subject: |
|
|
Thank you. I look at it.
Daniel
|
|
| Back to top |
|
|
Curt Palme
CRT Tech
Joined: 08 Mar 2006
Posts: 24396
Location: Langley, BC
TV/Projector: All of them!
|
| Posted: Sun Jan 22, 2012 3:49 pm Post subject: |
|
|
If your technician friend is not familiar with 1292 projectors, he most likely will not be able to repair it. THe best thing would be to send me the V board so I can test it in a 1292 test set here. THat's about the only way you'll get it repaired.
Cheers!
|
|
| Back to top |
|
|
d.gramophone
Joined: 22 Jan 2012
Posts: 5
Location: France
|
| Posted: Sun Jan 22, 2012 4:22 pm Post subject: |
|
|
Thank you for you answer Curt Palm; he came and spent two hours in testing dc card, other cards and the supplies of the board, but did not find what is wrong ; he would come Saturday with a oscilloscope. We have the documentation of the 1292; but if you think he does not find the wrong thing, if you show me where is the v board (i don't see v board but dc, da ,.., boards), I will send to you from France to be repair. It is a good one electronician (he repairs my Harman citation 12 ) , but it is not free also it is the same for me.
Daniel.
|
|
| Back to top |
|
|
HaydnG90
Joined: 22 May 2006
Posts: 1356
|
| Posted: Sun Jan 22, 2012 7:50 pm Post subject: |
|
|
|
Unless your tech has the service manual I would send the boards to Curt who has lots of experience repairing these sets. He has a test chassis and can chase your problem quickly.
|
|
| Back to top |
|
|
d.gramophone
Joined: 22 Jan 2012
Posts: 5
Location: France
|
| Posted: Mon Jan 23, 2012 6:46 am Post subject: |
|
|
|
I'll do that! Thank you and have a good day.
|
|
| Back to top |
|
|
d.gramophone
Joined: 22 Jan 2012
Posts: 5
Location: France
|
| Posted: Wed Feb 01, 2012 12:15 pm Post subject: |
|
|
The electronician came monday and spent three hours on my 1292; he thinks that the wrong come from the dc board, because there is three groups of 4 transistors and one diode which make the vertical signal and one of them go down with the oscilloscope; but none transistor or diode look bad; he thinks that this is a leek problem in tension. He will try to change the four transistors and the diode; what do you think of that?
There are no projector like the 1292 or the g90; i don't want to change for a numeric one that I will change two times a year!
Thank you for yours lights.
Daniel
|
|
| Back to top |
|
|
|
|
