CurtPalme.com Home Theater Forum

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Scanned 3 times just won't pick it up. It's a 99 % signal. My best one.
Any ideas ?

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Works fine on other tuner

**AnalogRocks** · Posted: Wed Nov 27, 2019 11:20 pm Post subject:

Same cable used for both?

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Yes

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Yes

**AnalogRocks** · Posted: Thu Nov 28, 2019 5:24 am Post subject:

I'd suspect that signal may be too strong for the second tuner. You could try a longer antenna lead or putting a F to F coupler and a second piece of co-ax in there to lessen the signal.

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Sounds like a good idea. I'll try it tomorrow.
Thanks.

jeffslife · Joined: 17 Apr 2010 Posts: 4190 Location: ohio usa

Dropped the signal to the point where I lost channels, a little at a time. Rescanned every time. Couldn't get channel 2 to come up. On that ota tuner. Works everywhere else.

**AnalogRocks** · Posted: Sun Dec 01, 2019 4:56 pm Post subject:

Sounds like a bum tunner