| Author |
Message |
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Wed Mar 20, 2013 2:11 am Post subject: G90 + The Hobbit + 3D = Awesome :) |
|
|
That was one of the very best 3D presentations I have seen on my G90. I could only spot ghosting if I chose to consciously look for it, so I didn't. This is a really good looking 3D movie for CRT.
Also, I went in with lower expectations, but I thought it was a decent movie. I actually liked it better than any of the LOTR trilogy. It was fun, exciting, and pretty interesting.
Check out the BD.
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying 
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
Nashou66
Joined: 12 Jan 2007
Posts: 16171
Location: West Seneca NY
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Wed Mar 20, 2013 2:42 am Post subject: |
|
|
Are you running 3D on the blend Tom?
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
Nashou66
Joined: 12 Jan 2007
Posts: 16171
Location: West Seneca NY
|
|
| Back to top |
|
|
overclkr
Joined: 08 Mar 2006
Posts: 4227
|
| Posted: Wed Mar 20, 2013 3:52 am Post subject: |
|
|
| Nashou66 wrote: | No I'm not. I dont have any interest at the moment. its 3D enough for me as is
Nashou |
You'll be seeing 3D from the BenQ hopefully when I come out
|
|
| Back to top |
|
|
digitalayon
Joined: 02 Mar 2009
Posts: 921
|
| Posted: Wed Mar 20, 2013 1:37 pm Post subject: |
|
|
|
You know what, ever since the blue giant movie, I have no desire to see another 3D movie. However that was the theater. And the Sony 3d and not Real D.
|
|
| Back to top |
|
|
Nashou66
Joined: 12 Jan 2007
Posts: 16171
Location: West Seneca NY
|
|
| Back to top |
|
|
jeffslife
Joined: 17 Apr 2010
Posts: 4190
Location: ohio usa
|
| Posted: Wed Mar 20, 2013 2:31 pm Post subject: |
|
|
IMAX 3D there is no equal.
_________________
We are ALL job creators !
|
|
| Back to top |
|
|
Spanky Ham
Joined: 22 Mar 2006
Posts: 5643
Location: Comedy Central
|
| Posted: Wed Mar 20, 2013 6:16 pm Post subject: |
|
|
|
I will assume you mean Imax film. I saw Avatar in Imax digital and didn't care for the 3D.
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Wed Mar 20, 2013 8:17 pm Post subject: |
|
|
IMAX varies in quality tremendously between theaters. Some of them are awful.
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
ecrabb
Forum Moderator
Joined: 13 Mar 2006
Posts: 15909
Location: Utah
TV/Projector: JVC RS40, Epson 5010
|
| Posted: Wed Mar 20, 2013 8:55 pm Post subject: Re: G90 + The Hobbit + 3D = Awesome :) |
|
|
| CIR Engineering wrote: | | That was one of the very best 3D presentations I have seen on my G90. I could only spot ghosting if I chose to consciously look for it, so I didn't. This is a really good looking 3D movie for CRT. |
Thanks, Craig! I've had the RS45 and a couple pairs of the MonsterVision glasses since last summer, but only had the PS3 and a non-3D prepro. I didn't want to buy a splitter AND a long HDMI cable, so I was holding off... Well, I finally got my hands on an Oppo 103 w/dual outputs, so now I just need an extra HDMI cable to the projector. I'll have to give this one a try!
SC
|
|
| Back to top |
|
|
overclkr
Joined: 08 Mar 2006
Posts: 4227
|
| Posted: Thu Mar 21, 2013 2:50 am Post subject: |
|
|
| jeffslife wrote: | | IMAX 3D there is no equal. |
Fo sho. IMAX FILM though 
|
|
| Back to top |
|
|
overclkr
Joined: 08 Mar 2006
Posts: 4227
|
| Posted: Thu Mar 21, 2013 2:51 am Post subject: |
|
|
| Nashou66 wrote: | | overclkr wrote: | | Nashou66 wrote: | No I'm not. I dont have any interest at the moment. its 3D enough for me as is
Nashou |
You'll be seeing 3D from the BenQ hopefully when I come out |
Might have to bring a 3D player too. I'm still old school ....Sorta
Nashou |
I'll make sure to have my old original trusty PS3 in my trunk as well! My time off got approved!
|
|
| Back to top |
|
|
AnalogRocks
Forum Moderator
Joined: 08 Mar 2006
Posts: 26706
Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
| Posted: Thu Mar 21, 2013 2:51 am Post subject: |
|
|
| overclkr wrote: | | jeffslife wrote: | | IMAX 3D there is no equal. |
Fo sho. IMAX FILM though |
_________________
Tech support for nothing
CRT.
HD done right!
|
|
| Back to top |
|
|
Spanky Ham
Joined: 22 Mar 2006
Posts: 5643
Location: Comedy Central
|
| Posted: Thu Mar 21, 2013 3:17 pm Post subject: |
|
|
| CIR Engineering wrote: | IMAX varies in quality tremendously between theaters. Some of them are awful.
craigr |
I can understand that, but to me that is IMAX's fault. If I am going to drive half a hour and pay more for a ticket then I should be getting a better experience.
I guess it is another reason I don't like going to the theater. I just went to see Oz and the whole time I kept focusing on the large vertical streaks in the screen material. Not to mention that the seats were uncomfortable.
|
|
| Back to top |
|
|
jeffslife
Joined: 17 Apr 2010
Posts: 4190
Location: ohio usa
|
| Posted: Thu Mar 21, 2013 5:16 pm Post subject: |
|
|
I agree about film, we drive an extra half hour for that.
_________________
We are ALL job creators !
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Thu Mar 21, 2013 5:53 pm Post subject: |
|
|
| Spanky Ham wrote: | | CIR Engineering wrote: | IMAX varies in quality tremendously between theaters. Some of them are awful.
craigr |
I can understand that, but to me that is IMAX's fault. If I am going to drive half a hour and pay more for a ticket then I should be getting a better experience.
I guess it is another reason I don't like going to the theater. I just went to see Oz and the whole time I kept focusing on the large vertical streaks in the screen material. Not to mention that the seats were uncomfortable. |
Yeah, I see about two films each year in the theaters because I always want to wait to watch it at home instead. Everything about the experience is better in my theater than in any commercial theater I have seen.
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
Tom.W
Joined: 09 Mar 2006
Posts: 6635
|
| Posted: Thu Mar 21, 2013 6:18 pm Post subject: |
|
|
| CIR Engineering wrote: | | Spanky Ham wrote: | | CIR Engineering wrote: | IMAX varies in quality tremendously between theaters. Some of them are awful.
craigr |
I can understand that, but to me that is IMAX's fault. If I am going to drive half a hour and pay more for a ticket then I should be getting a better experience.
I guess it is another reason I don't like going to the theater. I just went to see Oz and the whole time I kept focusing on the large vertical streaks in the screen material. Not to mention that the seats were uncomfortable. |
Yeah, I see about two films each year in the theaters because I always want to wait to watch it at home instead. Everything about the experience is better in my theater than in any commercial theater I have seen.
craigr |
The same here.
|
|
| Back to top |
|
|
|
|
