CurtPalme.com Home Theater Forum

[stones]

hello all. I have a dwin HD 700 plus transcanner. Recently the projector stopped broadcasting blue. looking into the lens i can see blue with black silouetts. What to do? Any and all help appreciated.

[Curt Palme]

Try reseating the video connectors at each end within the set, and reseat the connectors from the PC board going to the blue CRT socket PC board.

If not, the blue socket is bad. I can repair it or sell you another one on an exchange basis. Oh, also check if the test pattern will come up properly on the blue, but my guess is that it's dead there too.

[Curt Palme]

Try reseating the video connectors at each end within the set, and reseat the connectors from the PC board going to the blue CRT socket PC board.

If not, the blue socket is bad. I can repair it or sell you another one on an exchange basis. Oh, also check if the test pattern will come up properly on the blue, but my guess is that it's dead there too.

[stones]

What is involved in having you repair it? Where are you located?

[Curt Palme]

Vancouver Canada, but the set is modular, so all you need to send is a 1 lb PC board.

[Curt Palme]

Vancouver Canada, but the set is modular, so all you need to send is a 1 lb PC board.