Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
[ Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletter ] 

Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

 As this forum is rarely used anymore, we've locked it. Feel free to browse and read. Questions? Please reach out to us directly. Cheers! 

G90 picture failure via HDMI/IFB

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    CurtPalme.com Forum Index -> CRT Projectors
Author Message
cunim



Joined: 01 Sep 2008
Posts: 14
Posted: Sun Apr 05, 2009 3:17 am    Post subject: G90 picture failure via HDMI/IFB
My G90 has been displaying 1080p just fine, via HDMI from a BDP1500 to aClasse SSP800 and then a Moome full IFB card.

Today, I pressed play and nothing - no video or audio. Input C on the G90 eports "no input". Something else that is strange - unpligging the HDMI output cable from the processor to the G90 unmutes the audio.

Putting the BDP1500 directly into the IFB card yields no video. On the way to suspecting an IFB failure.

Feeding a component video signal from a Theta Voyager (but not the BDP1500) directly to the component in on the G90 works fine. So the pj appears to be working, at least at low res. More evidence that the IFB is gone.

Then I become confused again. Running the component signal into the Classe and then via component to the G90 fails. So - component works direct but not via the processor.

Has anyone had a Moome card fail in this way - no video or audio but unplugging the HDMI cable to the IFB unmutes the audio? Any ideas as to what to do?
Back to top
Clarence



Joined: 08 Mar 2006
Posts: 3827
Location: Smith Mtn Lake, VA

Posted: Sun Apr 05, 2009 3:23 am    Post subject: Re: G90 picture failure via HDMI/IFB
cunim wrote:
Input C on the G90 reports "no input".


Sometimes I'll unplug my G90 during a lightning storm. When I plug it back in, input C (Moome IFB) always comes up "no input"... I have to toggle to Input A, then back to Input C and everything is fine again.
Back to top
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    CurtPalme.com Forum Index -> CRT Projectors All times are GMT
Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum