Mollenvanger
Joined: 18 Jan 2009
Posts: 4
|
| Posted: Tue Feb 24, 2009 4:49 pm Post subject: HDMI-Universal 1.3 |
|
|
I also received my HDMI-Universal 1.3 today (2/24). The received power supply cannot be used in the Netherlands.
This supply has two flat pins/legs, and we uses here round pins/legs.
My just received HDMI-Universal 1.3 doesn't have also the H-Phase adjust jumper or potentiometer. Perhaps also the new type as the one from Neil.
When installing with another power supply (6V with the plus in the centre), nothing happens. Yes, two leds are burning, the
DET one, and the red one in the connector. The third led is the left one off the three, giving a green light and a flicker red light, with a frequency of app. 5 flashes a second.
I have adjusted the switches for my Barco 801, as the manual says, but no picture on all syncs from the media player “Dvico TVIX M-6500A (v2)”.
Using the HDfury 2 all works well.
How or what has to be done to get it working and, how do I adjust the H-Phase ?
Thanks,
Rob.
|
|
