CurtPalme.com Home Theater Forum

kschmit2 · Posted: Sat Nov 17, 2007 8:27 am Post subject: Runco DTV-933 question

Hi,

does anyone know whether the Runco DTV-933 is really limited to 50 kHz scanrate, or was that just a limitation due to a bundled processor, so that it would work like a plain 6 PG Xtra (max 69 kHz scanrate) if fed from a processor or HTPC capable of such refresh rates?

TIA
Kai

AvgOrdinaryGuy · Posted: Sat Nov 17, 2007 7:13 pm Post subject:

Can't say from experience but the spec chart on Curt's site shows 15-65 kHz.
http://www.curtpalme.com/PJSpecs_Runco.shtm

kschmit2 · Posted: Sat Nov 17, 2007 7:21 pm Post subject:

yeah, problem is, the cross reference shows 50 kHz, whereas my German Runco DTV-930 datasheet shows both 50 kHz max & 65 kHz max (there are other errors in it as well, so it is not really that useful).

Mark_A_W · Posted: Sat Nov 17, 2007 8:47 pm Post subject:

Someone tried it recently and found it scanned all the way I think.

Oliver maybe, and mentioned it on AVS I think...

kschmit2 · Posted: Sat Nov 17, 2007 9:41 pm Post subject:

thx Mark,

I actually archived that thread but totally forgot about it.

Really appreciate the help