CurtPalme.com Home Theater Forum

[Corleone88]

Hello,

I don't understand why my picture is smaller on the screen with a 1080p72 signal, than with a 1080i72 signal on my BG 1209s connected to a Lumagen Radiance. I need to readjust the geometry to set the width to the max level.

[Curt Palme]

It's not uncommon for a projector to change H width with different resolutions, but you can set up different memories within the Barco to accommodate that. Select '5' for 1080i/72, and '95'
for 1080p/72, or vice versa.

[Curt Palme]

It's not uncommon for a projector to change H width with different resolutions, but you can set up different memories within the Barco to accommodate that. Select '5' for 1080i/72, and '95'
for 1080p/72, or vice versa.

[Corleone88]

Ok but the difference between the two signals (about the width) is very big.
Looking through the lens, the picture does not fill the width fully(even with width set to max)