|
As this forum is rarely used anymore, we've locked it. Feel free to browse and read. Questions? Please reach out to us directly. Cheers! |
|
 |
|
|
| Author |
Message |
CasetheCorvetteman
Joined: 09 Nov 2008
Posts: 6326
Location: Australia
|
| Posted: Sat Oct 04, 2014 5:20 am Post subject: MOOME V3 ext 3D is not working... Still.... |
|
|
For some reason, when I set 3D mode on, I either get no image and a red LED blinking slowly about every 2-3 seconds, and if I get an image, it is one above the other.
Doesn't matter which resolution I set the OPPO 103D to, it does the same thing. Tried both HDMI inputs, same thing again. It isn't displaying the image in 3D, pushing the MODE button on the remote has no effect, setting the OPPO to auto 3D or FORCE 3D makes no difference either.
What is required to get this device to work the way it is advertised???
_________________
Barco Cine 9, ,Sony VPL570ES 4K SXRD, 135" OZ Theatre Majestic 16:9 screen, Denon X6700in preamp mode, 2x 7ch Tonewinner amps, 2x Tonewinner 15" subs, 2x 10" subs, 7.2.6...
RUNCO DTV991 LC ( NEC XG 852 LC ) 100" 4:3 screen, H/K AVR 7.1...
|
|
| Back to top |
|
 |
BGSPCS
Joined: 23 Aug 2006
Posts: 115
Location: Pottstown, PA
|
| Posted: Sun Dec 28, 2014 5:29 am Post subject: |
|
|
Did you ever get this resolved? I'm having issues getting a 3D sync signal out of the EXT V3. I am using a Lumagen XE as the input to the EXT V3. I have been in contact with Moome and need to do some probing on the board. I can drive the 1200X at 720P 100HZ and get a 3D image but no sync coming out of the EXT v3 box.
_________________
--
Brad S
Pottstown PA
|
|
| Back to top |
|
|
CasetheCorvetteman
Joined: 09 Nov 2008
Posts: 6326
Location: Australia
|
| Posted: Thu Jan 08, 2015 5:14 am Post subject: |
|
|
No mate i never did.
_________________
Barco Cine 9, ,Sony VPL570ES 4K SXRD, 135" OZ Theatre Majestic 16:9 screen, Denon X6700in preamp mode, 2x 7ch Tonewinner amps, 2x Tonewinner 15" subs, 2x 10" subs, 7.2.6...
RUNCO DTV991 LC ( NEC XG 852 LC ) 100" 4:3 screen, H/K AVR 7.1...
|
|
| Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Thu Jan 08, 2015 6:23 pm Post subject: |
|
|
I know that on the EXT there is a little solder job you can do to make the thing transmit 3D for ALL inputs signals. That way your 3D will work with custom resolutions, but it will also be on for 2D stuff. I had one client with a Marquee we setup like this. I don't remember the mod though.
Might be worth mentioning in an email to Moome.
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying 
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
ElTopo
Joined: 07 Nov 2006
Posts: 1640
|
| Posted: Thu Jun 18, 2015 5:17 pm Post subject: |
|
|
EXT 3D works plug 'n play with a Lumagen and 3D emitter.
ElTopo
_________________
Barco Cine 9 the one and only
|
|
| Back to top |
|
|
noos@xp37+
Joined: 17 Jun 2008
Posts: 464
Location: Berlin/Munich
|
| Posted: Wed Aug 05, 2015 4:43 pm Post subject: Re: MOOME V3 ext 3D is not working... Still.... |
|
|
| CasetheCorvetteman wrote: | For some reason, when I set 3D mode on, I either get no image and a red LED blinking slowly about every 2-3 seconds, and if I get an image, it is one above the other.
Doesn't matter which resolution I set the OPPO 103D to, it does the same thing. Tried both HDMI inputs, same thing again. It isn't displaying the image in 3D, pushing the MODE button on the remote has no effect, setting the OPPO to auto 3D or FORCE 3D makes no difference either.
What is required to get this device to work the way it is advertised??? |
Hello,
I had the absolute same problem - but changing the projector at the analog output solved the problem. From PC Nividia 3D Vision framepacked 3d I get an over and under 3D output at TAN Marquees from the moome card. But when I connect some Sony 12xx or a Sony HDIH - I get clean frame sequential 3d. This is from the same setup/video chain and hot swapping between projectors!
There is no technical explanation I can come up with, but for people with several display devices this will help.
Kind regards
Marc
|
|
| Back to top |
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Forum powered by phpBB © phpBB Group
|
|
