| Author |
Message |
karmat63
Joined: 19 Dec 2007
Posts: 157
Location: Italy
|
| Posted: Tue Jun 17, 2014 2:45 pm Post subject: |
|
|
| Nashou66 wrote: | The PJ will not run if any VDM or HDM cables are removed.
Also NEVER remove a VDM or HDM while the PJ is running!! it can cause a deflection burn on the tubes.
Some VDM's will buzz. I never had one but some times gluing the Capacitors together with hot glue will lower the buzz.
Have you looked on the front LED's from the LVPS to see if any are lit while its powered up?
Nashou |
Yes, I've removed the cables with the wit the PJ shut off, only to hear if there was any modification to the buzz, and looks like it came from the VDM (anyway, it's weird as I've never heard any high pitch noise before)
I've not looked at front LED on LVPS, this evening I will; BTW, this same evening I will take a working CLM from a friend and so I will be able to determine if the CLM failed...
Thanks, carmine
|
|
| Back to top |
|
 |
karmat63
Joined: 19 Dec 2007
Posts: 157
Location: Italy
|
| Posted: Wed Jun 18, 2014 2:06 am Post subject: |
|
|
Update:
looks like all problems with my Marquee came from a defective CLM daughter board; I switched my DPB with a working one and now everything is fine: now the projector works normally and the faint horizontal lines are gone.
The board come from an old 8000 so I still need an upgraded one for my 9500 Ultra, but, for the while I'm ok.
Thanks to everyone for the help...
|
|
| Back to top |
|
|
dvh99
Joined: 25 Dec 2009
Posts: 2158
Location: nederland
|
| Posted: Wed Jun 18, 2014 8:33 am Post subject: |
|
|
barclay66 might have one lying around, he`s in germany.
_________________
1 answer always poses multiple questions.
marquee 9500ultra HD10L moome hdmi1.3 v3+ some mods.
|
|
| Back to top |
|
|
barclay66
Joined: 27 Jun 2011
Posts: 1304
Location: Germany
TV/Projector: Marquee 9500 Ultra
|
| Posted: Wed Jun 18, 2014 10:11 am Post subject: |
|
|
| dvh99 wrote: | | barclay66 might have one lying around, he`s in germany. |
Yes, but I won't be back until next week (still in South East Asia) and after that week I will have to go again for another three weeks. So, if anything was to be arranged, it should be next week or after July 20th...
Regards,
barclay66
|
|
| Back to top |
|
|
|
|
