CurtPalme.com Home Theater Forum

truvkngfan · Joined: 07 Sep 2013 Posts: 1 Location: Minnesota

I just picked up a Sony D50, got everything converged pretty well but when I display an image from a video source it seems that there is considerably less green brightness than the red and blue. The colors seem all wrong. All 3 lamps have 619 hours on them so I would think that shouldn't be an issue. Looking for any sort of help, at a loss on what to do next.

Thanks in advance!!

CasetheCorvetteman · Joined: 09 Nov 2008 Posts: 6326 Location: Australia

No lamps in a CRT.

Go to the colour balance menu and turn up the green, or turn down red/blue.

**kal** · Posted: Sun Sep 08, 2013 5:40 pm Post subject:

You may be simply feeding it a component signal instead of RGB and not having things set up properly.

Can you tell us exactly how you have it all hooked up? What source? What cables?

Kal

**AnalogRocks** · Posted: Sun Sep 08, 2013 6:25 pm Post subject:

Go into the MENU and see what your input settings are as well. If you are using RGBHV and you have it set to HDTV or vice versa you will see some strange colors.