hansilili
Joined: 09 Mar 2007
Posts: 302
Location: Köln, Germany
|
| Posted: Fri Dec 21, 2012 9:59 am Post subject: hardwar alignment adjustment on NEC PG sets |
|
|
Hi everyone,
I have a 10PG, where all boards but point convergence and neck boards have been exchanged with a 6PGplus.
Anyone knows if there is a hardware pot (similar to Hwidth or Vheight) on the PGs to trim the alignment bow setting? My RC bow is maxed out due too the weired mechanical setup and curved screen. Currently this is compensated with extreme point convergence correction. This almost does the job and is stable - only that from time to time I loose all point convergence data at power shutdown and it is a PITA to renew.
(Yes, plug connetion on deflection and convergence board is correct. No, mechanical setup will not be changed, it represents the optimum compromise fpr curved screen projetion with GT17 lenses)
Thanks
hansilili
_________________
HansA, alles andere ist euer Bier!
|
|
