wwm
Joined: 15 Aug 2012
Posts: 18
|
| Posted: Mon Dec 10, 2012 9:47 am Post subject: BARCO 1280s2 Fault Description: |
|
|
Hi
Fault Description:
1) 1208s projector can start, you can see the grating projector projection tube, but to see less than the image of the input video signal. Can not see inside the grid and menu.
2) My piece of the R762720 circuit board, I put him onto the 808s projector on a normal work. 808s projector does not work, there is no image appears. However, three lines connected R762719 and R762720 is that you can work.
3) I would like to take it to a normal work in the 1209s on the the R762720 circuit board, plug it into my 1208s can be seen very light images can also see the light inside the grid and menu. If you turn up the brightness of the image on sight, but to adjust the contrast will not see the image change.
4) the use of hand-held remote control can not control the 1208s projector, I also tried the operation of the code, or did not succeed.
5) If you repair, I should send you a few pieces of circuit board do? Need to take control board R7625115, R762719 send you?
Thanks
|
|
