| Author |
Message |
Gannon
Joined: 08 Dec 2006
Posts: 164
Location: Detroit or the Interstates
|
| Posted: Wed Jun 06, 2012 10:06 pm Post subject: How does one set G2 on a G90? |
|
|
I've been a lot of places and done a ton of things...but I've never had retrace lines on a G90.
Curt can't find the instructions at the moment, whose got the skinny on how to set the G2s on a Sony G90?!
This is my Murphy moment on this Boulder trip. Hopefully the only one.
Cheers,
John
_________________
gadfly and rogue philosopher
|
|
| Back to top |
|
 |
Gannon
Joined: 08 Dec 2006
Posts: 164
Location: Detroit or the Interstates
|
| Posted: Wed Jun 06, 2012 11:21 pm Post subject: |
|
|
Done deal.
Craig, you rock.
Thanks for the quick reply.
Cheers!
_________________
gadfly and rogue philosopher
|
|
| Back to top |
|
|
wallace123456
Joined: 14 Aug 2006
Posts: 2236
Location: Northwest VA area
|
| Posted: Thu Jun 07, 2012 12:59 am Post subject: |
|
|
Dr. Rounds makes "internet email/PM house calls". Thank goodness!!!!!!!!!!!
wallace
_________________
Life Is Good, But BBQ Is Better! BBQ Competition Team
|
|
| Back to top |
|
|
Gannon
Joined: 08 Dec 2006
Posts: 164
Location: Detroit or the Interstates
|
| Posted: Thu Jun 07, 2012 5:31 am Post subject: |
|
|
It almost solved the problem. There is still some retrace in green which I've never seen in any Sony projector before, let alone a G90!
And the clipping in the Moome card is pissing me off.
Two out of four HDMI sources, one DVI actually...clipped the Moome into apoplexy.
But it does give me another day in Boulder, which ain't half bad.
_________________
gadfly and rogue philosopher
|
|
| Back to top |
|
|
HaydnG90
Joined: 22 May 2006
Posts: 1356
|
| Posted: Thu Jun 07, 2012 3:37 pm Post subject: |
|
|
|
What version Moome does the client have. You want V2 with the MP mods or V3 at a minimum. The differences the MP mods make are quite considerable.
|
|
| Back to top |
|
|
Gannon
Joined: 08 Dec 2006
Posts: 164
Location: Detroit or the Interstates
|
| Posted: Thu Jun 07, 2012 8:26 pm Post subject: |
|
|
Thanks!
On the outside, it merely says 1080P FULL-HD, on the inside the board id is IFB_FHDB, VER:0.3, 2010/03/19.
Client doesn't want to go to any extraordinary lengths to get that game working...and I'm 1,200 miles from home...and there seems to be no easy firmware updating on the card, so I'm guessing it is a great deal of work getting to V2 or V3.
I'll keep that in mind in the future.
Again, thanks for the response.
Cheers!
John
_________________
gadfly and rogue philosopher
|
|
| Back to top |
|
|
|
|
