| Author |
Message |
Rustyscout
Joined: 14 Mar 2007
Posts: 9
|
| Posted: Sun Oct 02, 2011 8:19 pm Post subject: Sony D50Htu adjustment |
|
|
|
I recently took my d50 out of storage and looking to get it set up. I posted this also on AVS but have had no response. (I know shocker). I had no problems setting up the green and red CRT's but the problem is with the blue. Maybe I am still not setting it up correctly but the test patterns are not on the tube face correct. Meaning the test patterns are missing the last portion on the left. I put up a hatch pattern and it is missing the last line on the left. I am sure it is just a simple adjustment. I do have the remote and manuals etc that originally came with the unit many years ago. What do I need to adjust? Clarification by looking at the crt faces with the leses on and sunglasses on I can see the pattern is missing all the way to the left and there is just to much room on the pattern to the right. Any help would be appreciated.
|
|
| Back to top |
|
 |
Rustyscout
Joined: 14 Mar 2007
Posts: 9
|
| Posted: Sun Oct 02, 2011 8:38 pm Post subject: |
|
|
|
Question, Do I just re-adjust the centering of the blue CRT and then manually re-adjust the tube after loosening the four screws? (on the top) Hope this makes sense.
|
|
| Back to top |
|
|
macgyver655
Joined: 22 Aug 2007
Posts: 8508
|
| Posted: Sun Oct 02, 2011 8:49 pm Post subject: |
|
|
|
Check the blanking for that section of the image. You may have to much.
|
|
| Back to top |
|
|
Rustyscout
Joined: 14 Mar 2007
Posts: 9
|
| Posted: Sun Oct 02, 2011 9:05 pm Post subject: |
|
|
|
will do, thanks
|
|
| Back to top |
|
|
|
|
