CurtPalme.com Home Theater Forum

[fosgate500]

hi everybody, thanks for read and try to help me,

the past sunday my marquee appears disfocused and the picture its so bad, but the friday works perfectly

well, when im try to use the ELECTRIC FOCUS in the remote dont make nothing with the picture, the only way its move manual to make the adjustements for sharp , this its normal? a some reason or must be see direrence when im move the electrical focus

and the only thing so help a lot to see my picture decently its if i move the "contrast to down"

the super video image its so ugly picture now, and pc trought rgbhv its so gray image,

the only thing so im change was the videocard of my pc, the saturday, but i don`t believe that was the reason to damage my picture of marquee,

and my pj´s its too heavy to move by accident

well im gonna try to move all again(mechanical,convergence,adjustements) im newbie,but before to do all night,

a some tips?

thanks everybody

[Nashou66]

Is the PJ mounted on the ceiling or the floor?

Athanasios

[Curt Palme]

Most likely the focus board died. I've got spares at $10 plus shipping, but reseat it first, and also reseat the CLM and the boards on the top of the CLM first.

Usually when the focus board dies, only one color is not adjustable, not all three.

[Curt Palme]

Most likely the focus board died. I've got spares at $10 plus shipping, but reseat it first, and also reseat the CLM and the boards on the top of the CLM first.

Usually when the focus board dies, only one color is not adjustable, not all three.

[fosgate500]

hi mr Nashou66 and mr curt,

well the pj´s its in the floor, over a heavy wood box,

and when im press help button the ,message its sharp and perfect with red color, but with green and blue its a litle poor againts the red,(its more legible the letters of the mesage in the red help instrucions menu)

the electronic focus work independtly for each tube?

and the electrical focus never works,(the electrical focus must be work like move mechanical???)

im use lens for my eyes ,

thanks for the quick response

[Curt Palme]

The electronic focus for each tube is in the service menu under 'util' on the remote. . Have you tried adjusting it there?

[Curt Palme]

The electronic focus for each tube is in the service menu under 'util' on the remote. . Have you tried adjusting it there?

[fosgate500]

hi mr curt,

yes(utilerias menu services 0901 pass ) and the picture its a litle better but not like the last week,

and the electrical focus never make nothing,

its possible so the rgb boad afect the clm convergence board,

the only thing so change from the last week was the videocard,of my pc,

but the picture of svideo its like a bad copy of the old beta casset player(i like my vhs tapes)

and the dvd its a original 9gb,movie "man on fire"

i remember when im see this movie the picture were amazing like feel the theathers (in supervideo not line double/quad)

and now its like see the low end pj lcd gray,fuzzy

i dont believe so the problems are my eyes(im use lens )

im pickup this pj its june, and the picture was amazing,

the problem its im in the job right and i can make adjustemenst until 7pm(west time)

thanks for follow the post

[Curt Palme]

I would suspect the focus board then. Without swapping boards, you won't know for sure, but that's what it sounds like.

[Curt Palme]

I would suspect the focus board then. Without swapping boards, you won't know for sure, but that's what it sounds like.

[fosgate500]

Hi curt and nashou66,

im be very apreciated with yours and all peoples of this amazing place,

im pull out the focus board, clean, reinstall and the cover attachs again with a screwdriver,
and magic,

the picture response again amazing, the electrical focus works perfect like never, im think its a firts time so work, ,when im pick up the pj, never works i believe,

its like a honneymoon again jejeje beetwen mi pj and me

its time to make a full mechanic adjustements agains, because the screen apears good but with a black bars at sides

HOW i can fix the bars at sides(its like a black test patterns bars)??? and litlle grays color yet,

Anyways i need to buy a focusboard for get one for replacement,(its a lot diference with the performance mod?)???

BEST REGARDS all people and happy holydays