| Author |
Message |
Ironman1965
Joined: 28 Jun 2007
Posts: 98
|
| Posted: Fri Apr 02, 2010 5:08 pm Post subject: Silicone Removal Question |
|
|
|
I've removed the old silicone with a razor from the tubes aluminum housing but there still seems to be a super thin skin in a few places that doesn't seem to want to come off. Any suggestions on how to remove this without damaging the housing, or is it even necessary.
|
|
| Back to top |
|
 |
jkruger
Joined: 24 Oct 2007
Posts: 2435
Location: Carlsbad, CA
|
| Posted: Fri Apr 02, 2010 5:16 pm Post subject: |
|
|
|
Some say soaking it in gasoline or turpentine takes it off. I think Berrymans B-12 automotive cleaner work also.
|
|
| Back to top |
|
|
Sparky015
Joined: 12 May 2009
Posts: 1185
Location: Cleveland / Akron, OH
|
| Posted: Fri Apr 02, 2010 5:35 pm Post subject: |
|
|
yeah, there is a recent thread by Curt that talks about using gasoline.
_________________
~Paul
|
|
| Back to top |
|
|
LOTREE
Joined: 19 Mar 2006
Posts: 401
Location: Paradise, Newfoundland
|
| Posted: Fri Apr 02, 2010 7:48 pm Post subject: |
|
|
It's not necessary. Having worked with Belron in auto glass replacement, when removing a windshield often a thin part of the old silicon bead is left behind which is fine. The main goal was to avoid scratching the surrounding paint as that had to be touched up with a special sealant on bare metal. The silicone we used, developed by Mercedez, would bond to the old silicone without issue. I cleaned all 3 tubes in my ECP 4500 and sealed it back up using high heat RTV silicone and no leaks. I made sure the glass was spotless and I removed most of it from the metal surround but a small skim left behind didn't cause a problem. I wouldn't worry about it.
_________________
Zenith Pro 1200x | Electrohome ECP 4500 | Yamaha HTR-5740 | HTPC & Speaker build to follow
|
|
| Back to top |
|
|
|
|
