| Author |
Message |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 2:44 pm Post subject: Balls |
|
|
This is a true story...
A couple weeks ago I was changing the green tube in my own G90. When I had the tube free of the projector, the HV lead swung down and contacted my pants right at the crotch. The tube must not have fully discharged (as is common) and a hefty jolt of HV went right through my pants and hit me square in the nuts. It really really hurt
So the moral is watch out for your balls when you carry a tube after removing it from a projector
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
emdawgz1
Joined: 14 Mar 2006 Posts: 7949
|
| Posted: Wed Feb 24, 2010 2:47 pm Post subject: |
|
|
HOLY SMOKES!!!
That's Gotta hurt!
_________________ Follow my blog
www.thesinglebrother.com
|
|
| Back to top |
|
 |
Nashou66
Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY
|
| Posted: Wed Feb 24, 2010 2:53 pm Post subject: |
|
|
LMFAO!!!!!!!! Holy sh*t!!! I am literally laughing so hard right now!!!!!! If you have never met Craig you can't visualize it as well as if you do know him. Man I hope your not sterile now man!!!! You better go go get a count of your boys and make sure they can still swim!!
Hey we have to get together when your up here in buffalo.
Athanasios
_________________ Don't blame your underwear for your crooked ass~ unknown Greek philosopher
"Republicans believe every day is the Fourth of July, but the Democrats believe every day is April 15." --- President Reagan
One Smart Dog!!!
Marquee High Performance Bellows now shipping!!
Marquee Modifications and Performance Enhancement
Marquee C-element and Bellow removal
|
|
| Back to top |
|
 |
akajester
Joined: 09 Jul 2008 Posts: 934 Location: Wisconsin
|
| Posted: Wed Feb 24, 2010 3:21 pm Post subject: |
|
|
|
I'm so sorry for laughing. omg, that is so funny and awful all at the same time.
|
|
| Back to top |
|
 |
ecrabb Forum Moderator
Joined: 13 Mar 2006 Posts: 15909 Location: Utah
TV/Projector: JVC RS40, Epson 5010
|
| Posted: Wed Feb 24, 2010 3:26 pm Post subject: |
|
|
No way, Craig! That's crazy!
How long had the projector been shut down? I'm just curious how long the tubes retain that kind of potential...
I used to work at a small computer dealer... So, the repair tech was this old guy (to me he was old - probably in his 50's - now, that's not old at all...arrgghhh) Anyway, he was a total geek, shortwave radio, TV, tubes, the works... Very weird, but pretty neat at the same time. Anyway, he used to impress upon me at every opportunity how dangerous the little 9" B/W tubes from the early Macs were. Remember those machines? The little "porthole" Macs? Anyway, one time he showed me... POW! He said, "That'd do the number on your heart, wouldn't it?" It left an impression, alright!
Glad "the boys" are OK!
SC
|
|
| Back to top |
|
 |
Ben851
Joined: 13 Sep 2008 Posts: 221 Location: Ottawa, Ontario
|
| Posted: Wed Feb 24, 2010 3:33 pm Post subject: |
|
|
I think we're all missing the important question here - did you drop the tube?!
Glad to hear you're ok
_________________ Thanks,
Ben
|
|
| Back to top |
|
 |
HaydnG90
Joined: 22 May 2006 Posts: 1356
|
| Posted: Wed Feb 24, 2010 3:59 pm Post subject: |
|
|
Shocking
|
|
| Back to top |
|
 |
ecrabb Forum Moderator
Joined: 13 Mar 2006 Posts: 15909 Location: Utah
TV/Projector: JVC RS40, Epson 5010
|
| Posted: Wed Feb 24, 2010 4:05 pm Post subject: |
|
|
| Ben851 wrote: | I think we're all missing the important question here - did you drop the tube?!  |
You said "tube" in a thread about balls... Heh heh heh...
Tube and balls... Tube and balls...
SC
|
|
| Back to top |
|
 |
jkruger
Joined: 24 Oct 2007 Posts: 2435 Location: Carlsbad, CA
|
| Posted: Wed Feb 24, 2010 4:10 pm Post subject: |
|
|
|
When my vasectomy was done the nurse failed to put the ground plate for the electrocautery knife under my ass. Not only did I get the shot of anesthetic in my sack that felt the sting of a wasp, but when they cut the tubes the jolt went from my nuts to my knees which were in these metal supports attached to the table. The doctor figured out what was wrong about halfway thru the procedure. He thought I was just a pussy until he saw the ground plate hanging on the side of the table. They were extremely apologetic afterward.
|
|
| Back to top |
|
 |
jarseneau
Joined: 06 Nov 2007 Posts: 323 Location: WI
|
| Posted: Wed Feb 24, 2010 4:13 pm Post subject: |
|
|
I've heard of ball lightning...
In some situations like this, people discover amazing new abilities. I assume nothing happened that lasted over 4 hours.
_________________ Jerry
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:18 pm Post subject: |
|
|
| Nashou66 wrote: | LMFAO!!!!!!!! Holy sh*t!!! I am literally laughing so hard right now!!!!!! If you have never met Craig you can't visualize it as well as if you do know him. Man I hope your not sterile now man!!!! You better go go get a count of your boys and make sure they can still swim!!
Hey we have to get together when your up here in buffalo.
Athanasios |
I am ok guys and this story is supposed to be funny so go ahead and laugh
I'm going to try and come by while I am up there Tom. It is going to be near or at the end of the trip so I might be kinda antsy and ready to be home though.
We'll see and I'll let you know in the next couple days.
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:22 pm Post subject: |
|
|
| ecrabb wrote: | No way, Craig! That's crazy!
How long had the projector been shut down? I'm just curious how long the tubes retain that kind of potential...
I used to work at a small computer dealer... So, the repair tech was this old guy (to me he was old - probably in his 50's - now, that's not old at all...arrgghhh) Anyway, he was a total geek, shortwave radio, TV, tubes, the works... Very weird, but pretty neat at the same time. Anyway, he used to impress upon me at every opportunity how dangerous the little 9" B/W tubes from the early Macs were. Remember those machines? The little "porthole" Macs? Anyway, one time he showed me... POW! He said, "That'd do the number on your heart, wouldn't it?" It left an impression, alright!
Glad "the boys" are OK!
SC |
The projector was not shut down more than 15 minutes as I can change a tube pretty fast in a G90 (may have only been 5 minutes even).
Your old timer story makes a good point. These tubes are supposed to drain off the HV on their own. However, I don't trust them and I always remove the HV lead and ground it directly to the chassis. I had already done a grounding and I still managed to get hit. I really don't understand how it happened as I thought for sure the tube was discharged.
It was not the full wallop that you can get from a fully charged CRT. So I was spared the extreme pain, but it still hurt pretty bad. I wish I had be running a video camera because I probably would have won $10,000 on Americas Funniest Home Videos.
So watch out for you balls and other anatomy when handling a removed tube even if you already grounded it
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:23 pm Post subject: |
|
|
| Ben851 wrote: | I think we're all missing the important question here - did you drop the tube?!
Glad to hear you're ok  |
Of course not The tube survived.
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:24 pm Post subject: |
|
|
| HaydnG90 wrote: | Shocking  |
Literally!
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:25 pm Post subject: |
|
|
| jkruger wrote: | | When my vasectomy was done the nurse failed to put the ground plate for the electrocautery knife under my ass. Not only did I get the shot of anesthetic in my sack that felt the sting of a wasp, but when they cut the tubes the jolt went from my nuts to my knees which were in these metal supports attached to the table. The doctor figured out what was wrong about halfway thru the procedure. He thought I was just a pussy until he saw the ground plate hanging on the side of the table. They were extremely apologetic afterward. |
Wow, now that is a terrible story OMG
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008 Posts: 4269 Location: Chicago USA & Berlin Germany
|
| Posted: Wed Feb 24, 2010 4:26 pm Post subject: |
|
|
| jarseneau wrote: | I've heard of ball lightning...
In some situations like this, people discover amazing new abilities. I assume nothing happened that lasted over 4 hours.  |
Just call me "The Zapper." My special power is that I can hit the snooze button on my alarm clock by pointing my finger at it
craigr
_________________ JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
 |
dturco
Joined: 06 Feb 2009 Posts: 3778 Location: Eastern Shore Maryland
TV/Projector: Runco DLP VX-3000i Marquee 9500 parts doner
|
| Posted: Wed Feb 24, 2010 4:41 pm Post subject: |
|
|
I would have thought that ability would have gone somewhere other than your finger
Glad to hear you did'nt get the full shot.
_________________ Firefly rules. Can't stop the signal.
http://www.hulu.com/firefly
|
|
| Back to top |
|
 |
bbfarmht
Joined: 27 May 2006 Posts: 1273 Location: Where the Mississippi runs east to west!!
|
| Posted: Wed Feb 24, 2010 11:20 pm Post subject: |
|
|
| dturco wrote: | I would have thought that ability would have gone somewhere other than your finger
Glad to hear you did'nt get the full shot. |
No, I think Craigs ability is his wife never need batteries again.
_________________ Adam
"Any society that would give up a little liberty to gain a little security will deserve neither and lose both"
Benjamin Franklin
|
|
| Back to top |
|
 |
dochlywd
Joined: 25 Apr 2006 Posts: 346 Location: Saint Louis, Missouri
|
| Posted: Thu Feb 25, 2010 12:17 am Post subject: |
|
|
Hmmmmm.....
There once was a man from glass,
That had two balls of brass,
He'd clang them together,
They would play stormy weather,
And lightening would shoot out of his...................................
|
|
| Back to top |
|
 |
AnalogRocks Forum Moderator
Joined: 08 Mar 2006 Posts: 26706 Location: Toronto, Ontario, Canada
TV/Projector: Sony 1252Q, AMPRO 4000G
|
| Posted: Thu Feb 25, 2010 12:29 am Post subject: |
|
|
HI! BILLY MAYES HERE FOR THE INCREDIBLE "ZIPPER ZAPER"
|
|
| Back to top |
|
 |
|
|