CurtPalme.com Home Theater Forum

[the_maniac]

Hello,

I'd like to use my Marquee with PC (analog 1080i) oder XBOX360 (analog 720p), so i replug the one input i have between PC and XBOX.

So i have to save two input setting, but haven't got this until yet. Anybody knows how it works ?

regards

[dvh99]

first you should use powerstrip but thats what i do.
ok just do the focus astig optical scheimpflug and converging for your pc.
then copy that setup to recall01, that will be channel 1 recall memory 1.
press recall on the remote and enter 01
then in the util source setup menu click on current setup (should be locked.)
now plug in the xbox and converge till you get a good picture.
then in the util source setup hit enter on copy setup and copy it from recall01 to recall02.
you can lock this setup as you will but its not necessary.

thats it ganz einfach.

[the_maniac]

thanks a lot i've got it

[ralpharch]

I've got many recalls setup and they work fine

I am currently interested in using the automatic recall change feature. (e.g. - Moome ext hd outputting PS3 where that output can be either 1080i or 720p or 480p depending on the source material.) I sure would like to be able to have the pj automatically detect that it is receiving a 4:3 DVD playback at 480 p (maybe not 480i) and switch the pj recall to match that setting, and be able to use my screen fully in 4:3 mode; or a proper display when the cable box switches between 720p and 1080i material. I recollect it can be done but I suppose there is a reason I haven't set it up yet besides inertia

Any quick feedback on setting up auto-recall selection?

[dvh99]

there is no such thing to my knowledge
i use my ps with 2 settings and two recall memories 1 for 1080p and 1 for 720p(most games) its no bother to me to recall a memory.