CurtPalme.com Home Theater Forum

[snkby]

can help me out ?

heres what happened.........

laserdisc and svhs connected to yamaha avr for av switching.

s-video monitor out of the yamaha into the cs-2 then out of the cs-2 via vga into a vga/dvi transcoder.

the cs-2 would not handshake with the hdfury but the vga/dvi transcoder will.

it worked beautifully until i went into the cs-2 menu and switched -hdcp- from -auto- to -on- thinking this might solve the handshake issue.

what i didnt realize until getting no image and looking at the online manual for the cs-2 is that if the hdcp is set to -on- then it disables all analog outputs.

i dont have another display that will connect with the cs-2 dvi/hdmi so that i can see the menu and change the hdcp back to -auto- and the manual doesnt show a menu tree/flowchart so that i can do it blind.

can anyone tell me the flowchart to change the hdcp to -auto- ?

thanks