F16wes
Joined: 29 Jan 2009
Posts: 24
Location: Orlando, Florida
|
| Posted: Sat Apr 11, 2009 3:17 am Post subject: Electrohome ECP |
|
|
Hey everyone I'm working on a friends ECP3100 and the glycol glass on the blue SD187 ended up being cracked so I placed a 07MS from another non working ECP in its place. This tube has different magnetics than the SD187 but we left them and gave it a shot but the blue raster is way off compared to the other tubes. So my question is do I need to transfer the yokes from the SD187 or is there a way to setup the raster on the blue tube alone or should i just take the front glass from the 07MS and place it on the SD187 or should I just replace all the tubes with the 07MS tubes. I know lots of or's I'm sorry but this ECP is frustrating as its nothing like my 1272. Thanks in advance 
|
|
