CurtPalme.com Home Theater Forum

W9TR · Joined: 12 Nov 2008 Posts: 20

I've been having a great time bringing up this card with my Sony BDP S550. I have a few questions:

It seems the Gamma setting doesn't stick through a projector power down. Is this behaviour normal? Is so, can it be forced somehow? No big issue if it can't, just more IR commands in my power up marcos.

The card sometimes gets lost when I'm switching from the RGBHV souce on input A to the moome card on input B. Or when I power up the system with input A active, it won't recognize the HDMI input when I switch to B. Sometimes switching back and forth fixes it, sometimes I have to cycle power to the projector. If I start the system with input B active, there is never a problem - everything works fine. Has anyone else seen this behaviour, and is there a way to fix it? Again, I have a work around, which is switching to input B before the PJ powers down. Problem is, my IR macro strings are getting long, and the longer they are, the less reliable they become.

I'm trying to make this as family friendly as possible. Overall a great product. My G70 has never loooked better.

**AnalogRocks** · Posted: Sun Feb 15, 2009 6:03 pm Post subject:

What you are experiancing if the HDMI handshake. When your BDP-S550 comes on before the Moome card it can't see anything to handshake too. HDMI is flakey at times ( understatement ) and when you switch from B/A then A/B sometimes you will see a link other times not.

Set up your Macros to turn the Bluray player on last and see if that helps.

W9TR · Joined: 12 Nov 2008 Posts: 20

Thanks. I'll modify my IR command strings so the BDP-S550 comes on last. I may have to power down the player anytime I switch to the A input.

Anybody have any comment on the Gamma not sticking on the moome IFB FUll HD? Any workarounds?