robin36mac
Joined: 24 Jan 2009
Posts: 46
|
| Posted: Sat Jan 24, 2009 1:38 am Post subject: Sony VPH-1271Q turning off with video signal and no picture |
|
|
Hi,
I bought a few days ago a Sony VPH-1271Q for cheap that might work... but it doesn't...
When I turn it on I don't have any picture at all, and it automatically turn off when I use a connected video source, with the error code 02, and sometimes the number 08.
I've also redo a bad solder of a capacitor on the E board, and it is better by the way that now it doesn't turn off by itself as it was at the beginning (I mean even without video input).
I had two times a picture while turning on (the Wait for 20 minutes...etc) but it faded to black slowly in ten seconds...
I checked every connection and solder I could... but I think I have to change a flaing board...
Does someone have an idea of wich one ? Someone can test them ? or any idea of what I can do...
Thank you,
Oh, also I precise it is my first experience with CRT projector, and for my poor english, I'm not an english-native :p
Robin MARTIN
|
|
