View previous topic :: View next topic |
Author |
Message |
whiterabb1t
Joined: 07 Jan 2019 Posts: 2
|
Link Posted: Thu Mar 07, 2019 10:05 pm Post subject: Barco 909 horizzontal line problem |
|
|
Hi all, i'm Stefano from Italy, i recently buyed a Barcoreality 909, and i have a problem with the horizzontal line in any frequency and resolution, all is in midpoint and i have already replace all board (without the vertical (i don't have it..)) including the convergence/astigmatism/focus board, but the problem persist, i attach a documentation:
If i disconnect the conv coil red/green/blu cable the problem disappears
https://www.youtube.com/watch?v=u66_t75BXJ4
Description: |
|
Filesize: |
359.64 KB |
Viewed: |
11777 Time(s) |
|
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24296 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Thu Mar 07, 2019 11:48 pm Post subject: |
|
|
The problem is the controller board, which are hard to find. I can repair that though, and have done so on a number of 909 controllers. Let me know if you want to send it in for repair.
Email me through the website please.
|
|
Back to top |
|
|
whiterabb1t
Joined: 07 Jan 2019 Posts: 2
|
Link Posted: Fri Mar 08, 2019 6:54 am Post subject: |
|
|
Curt Palme wrote: | The problem is the controller board, which are hard to find. I can repair that though, and have done so on a number of 909 controllers. Let me know if you want to send it in for repair.
Email me through the website please. |
Ah ok thanks for reply
|
|
Back to top |
|
|
|
|