| View previous topic :: View next topic |
| Author |
Message |
papalek
Joined: 08 Mar 2006
Posts: 1537
Location: Longs SC
|
 Link Posted: Sun Sep 22, 2019 6:40 pm Post subject: Ampro 4600 focus |
 |
|
Is there a way to get more magnetic focus? They were all good for a long time but things started looking a bit off all across the screen. So I checked test screen and it was blurry. I adjusted the magnetic focus. Center is perfect and top and bottom are very nice. But both left and right on all tubes are maxed out on the settings and a bit blurry still.
_________________
My current list of PJ's AmPro 1 1/2-4600,4200, 1/2-3600,2600.
I do love my AmPro's
|
|
| Back to top |
|
 |
HaydnG90
Joined: 22 May 2006
Posts: 1335
|
| Link Posted: Sun Sep 22, 2019 6:50 pm Post subject: |
|
|
|
Increase frequency if pj can handle more bandwidth. I'm running 1080/72Hz which was noticeably sharper than 1080/60
|
|
| Back to top |
|
|
gjaky
Joined: 05 Jun 2010
Posts: 2790
Location: Budapest, Hungary
|
| Link Posted: Sun Sep 22, 2019 7:44 pm Post subject: Re: Ampro 4600 focus |
|
|
| papalek wrote: | | Is there a way to get more magnetic focus? They were all good for a long time but things started looking a bit off all across the screen. So I checked test screen and it was blurry. I adjusted the magnetic focus. Center is perfect and top and bottom are very nice. But both left and right on all tubes are maxed out on the settings and a bit blurry still. |
I'd suggest to check if the adjustments make any difference at all? Also, see if your astigmatism is dialed in right?
_________________
projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB, VIM-DB
|
|
| Back to top |
|
|
papalek
Joined: 08 Mar 2006
Posts: 1537
Location: Longs SC
|
| Link Posted: Sun Sep 22, 2019 9:47 pm Post subject: |
|
|
I reset the adjustments back to 50% and made slight adjustments back and forth. I realized that the center and edges effect each other. I was able to get it way closer than it was before. Not perfect but way better.
_________________
My current list of PJ's AmPro 1 1/2-4600,4200, 1/2-3600,2600.
I do love my AmPro's
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
