View previous topic :: View next topic |
Author |
Message |
Corleone88
Joined: 09 Dec 2006 Posts: 448 Location: France
|
Link Posted: Sat Sep 15, 2018 9:34 am Post subject: Radiance 2041 vs 2143 |
|
|
Hello,
In order to get a clean 190MHz signal for my BG1209s, apparently I can do that with a 2041 or a 2143. As a 2041 is cheaper than the 2143, I would like to know what I will miss or what is not as good as the 2143 on the 2041. Picture quality, noise, stability?
Thanks.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17860 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
Link Posted: Sat Sep 15, 2018 12:55 pm Post subject: |
|
|
The Radiance 2041 has 4x1080p HDMI 1.4 inputs, 1x1080p HDMI output, 1x4K UltraHD output (2160p@24/30Hz), 729 point CMS.
The Radiance 2143 has 8x1080p HDMI 1.4 inputs, 1x1080p HDMI output, 1x4K UltraHD output (2160p@60Hz), 4913 point CMS.
For your projector it won't make a difference.
We have open box / previously owned units available that come with full manufacturer warranty and support. Trade-ins available too. Email me at kal@curtpalme.com for details.
Kal
_________________
Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
|
|
Back to top |
|
|
Corleone88
Joined: 09 Dec 2006 Posts: 448 Location: France
|
Link Posted: Fri Sep 28, 2018 2:18 pm Post subject: |
|
|
Thanks Kal,
I tried a 2041. Lumagen team told me that above 190MHz, the signal would not be as clean than under 190MHz.
Well I tried 960p72Hz (around 160MHz) and 1080p72 (198MHz) and I do not see any difference in PQ.
But this is just my eyes
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17860 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
|
Back to top |
|
|
|
|