View previous topic :: View next topic |
Author |
Message |
BruceR
Joined: 05 Nov 2018 Posts: 4 Location: Brisbane, Australia
|
Link Posted: Mon Nov 05, 2018 10:05 pm Post subject: P16LJEO7 & P16LJEO8 Tubes |
|
|
Hello everybody. I see on the Projector Specifications page these tubes are interchangeable between a few NEC models. Anyone know if that applies to a Sony G70 as well? Or what the difference between the tubes is? Thanks in advance.
|
|
Back to top |
|
|
gjaky
Joined: 05 Jun 2010 Posts: 2789 Location: Budapest, Hungary
|
Link Posted: Tue Nov 06, 2018 8:42 am Post subject: |
|
|
They are interchangeable tubes, but the G2 is on a different pin on the tubes, the P16LJE07 (standard NEC XG tube) has the so called KH grid, which if properly used lowers the cathode capacitance (just like with LUG tubes) and is easier for the CRT amplifier to achieve better bandwidth with that. P16LJE08 (standard G70 tube) does not have this grid.
_________________ projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB, VIM-DB
|
|
Back to top |
|
|
BruceR
Joined: 05 Nov 2018 Posts: 4 Location: Brisbane, Australia
|
Link Posted: Wed Nov 07, 2018 9:03 am Post subject: |
|
|
Thanks gjaky. I've found the pages covering the neckboard mod on the site with your help, didn't realise it had already been covered.
|
|
Back to top |
|
|
[Frankie]
Joined: 16 Jun 2014 Posts: 88 Location: Italia
|
Link Posted: Thu Nov 15, 2018 2:43 am Post subject: |
|
|
Hey! Talking about G70 and NEC XG, i wanted to ask if i can use some of those tubes from a G70 for repairing a NEC XG 1351LC. Thanks in advance for any reply!
_________________ 90' Kid
|
|
Back to top |
|
|
|
|