CurtPalme.com Home Theater Forum

[yener333]

Hello,

I bought a Sony G70 with 6700 hours and struggled few days
and night trying to setup convergence.

My Convergence jumped around,Error 35 every few hours.
The value chaned by pressing buttons but a few or all Concergence settings
wont work.nothing move on screen.
EM Focus same,nothing happened.i put out the boards and put in back.
Sometimes it changed a bit,sometimes picture was shaky.

I wrote with grandmaster Curt,he helped a bit.

The Problem was not the convergence,it was the Focus board.

All boards sits snuggy,but Focus Board was to loose.
I removed it again,solder the connector joints new and forced the golden contact pins
a bit near together,to the board fits snuggy tight.
Dont force the pins to much.

Now Sony G70 works nice.If you have same Problems,the your Board Connection.

Greets

Yener