View previous topic :: View next topic |
Author |
Message |
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sat Oct 28, 2017 8:56 pm Post subject: All Barco 1209s modules-$15 each! |
|
|
Guys, I just picked up 7 Barco 1209s that were in working shape when de-installed. I am parting all of these out, and am dropping the good tubes into my 909 sets.
I am selling every board in the set for $15 USD each plus shipping, minimum order 4 boards to make them worth packing up. Most of the boards are late model boards, including the EHT boards and the H shift/focus board, with one of the resistors mounted to the heat sink, rather than to the PC board, where the solder joints always crack.
The only exception to the $15 board price are the HV splitter and quadruplers. Everything else is fair game.
This is a good way to pick up some tested working spare boards. All of the sets have convergence on green on the main convergence driver board, so that's a good way to pick up that option as well. They are all G1209s, in case you want to pick up a controller board, the Data and Graphics 1209s boards will not interchange. All other boards will.
I start retubing the 909 next week. Those will go for record low prices as well.
I did retube a couple of these 1209s projectors 2 years ago with Eisemann greens and LUG reds and blues. At quick glance, those are still OK, and don't show the windshield wiper wear pattern, although I did see that wear on a couple of the green tubes that are still original.
Oh, if someone wants 1209s tube frames with the worn tubes and glycol intact, those are $15 each as well. I've got a few of those.
Not selling lenses yet as I have to make sure I have enough for the 909 sets that have curved screen lenses on them.
Email or PM me if you want boards!
|
|
Back to top |
|
|
Pokemon640
Joined: 28 Jul 2015 Posts: 49 Location: Greece
|
Link Posted: Sun Oct 29, 2017 3:33 pm Post subject: |
|
|
i own a G1209s unit,
great, i was thinking to upgrade my 1209 boards with eisemann modifications, how much will cost this mod ? is it any visible difference ?
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Oct 29, 2017 4:00 pm Post subject: |
|
|
I don't do the mods, sorry, you'd have to talk to Greg himself. No problem sending boards to him if you want.
|
|
Back to top |
|
|
lydmann
Joined: 12 Aug 2006 Posts: 56 Location: Norway
|
Link Posted: Sun Nov 12, 2017 5:04 pm Post subject: |
|
|
Can I use green convergence card in 1209/2? How do I order?
|
|
Back to top |
|
|
lydmann
Joined: 12 Aug 2006 Posts: 56 Location: Norway
|
Link Posted: Sun Nov 12, 2017 5:06 pm Post subject: |
|
|
Can I use green convergence card in 1209/2? How do I order?
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sun Nov 12, 2017 6:30 pm Post subject: |
|
|
The firmware/board layout may be slightly different between the 1209s and the 1209. Give me an email to curtpalme@shaw.ca
|
|
Back to top |
|
|
lydmann
Joined: 12 Aug 2006 Posts: 56 Location: Norway
|
Link Posted: Sat Nov 25, 2017 2:17 pm Post subject: |
|
|
I send you a email, but no answer lately
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Sat Nov 25, 2017 4:02 pm Post subject: |
|
|
I won't be returning emails until after Dec 6, as I am out of town, and my day job is insanely busy right now. I will catch up over the holidays, sorry!
|
|
Back to top |
|
|
lydmann
Joined: 12 Aug 2006 Posts: 56 Location: Norway
|
Link Posted: Tue Nov 28, 2017 1:46 pm Post subject: |
|
|
Dont understand that, you are answering post here, but not email? Do you still have green convergence cards?
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24305 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Tue Nov 28, 2017 3:07 pm Post subject: |
|
|
I will respond here, but I have no time to process any orders until I get back. I will spend the better part of a week catching up on emails when I return, so that everything is dealt with by Christmas. Yes I have COG cards, and everything else for the 1209s.
|
|
Back to top |
|
|
|
|