View previous topic :: View next topic |
Author |
Message |
CozumelDiver
Joined: 19 Jan 2013 Posts: 6
|
Link Posted: Sat Sep 16, 2017 3:53 am Post subject: Green LED on R762721 BG808s Neckboard (Amp) |
|
|
Can anybody tell me what the green LED on the BG808s neckboard indicates? I just noticed the LED for the Green Tube is off, but both Red and Blue Tubes have the light on. (Seems to me they all used to be on...)
Projector still appears to function properly.
Thanks!
|
|
Back to top |
|
|
Hulio
Joined: 15 Apr 2006 Posts: 469 Location: Belgium
|
Link Posted: Sat Sep 16, 2017 6:50 am Post subject: |
|
|
Those are there to indicate a proper G2 voltage of the tubes. The potentiometers are to be found on the G2/diagnostic board, just behind the focus block.
http://www.curtpalme.com/Barco808_Layout7.shtm
If the leds are lit or not during normal operation, is irrelevant. They should be off only when in G2 adjustment mode (service menu). Page 37 from the installation manual describes the procedure well.
|
|
Back to top |
|
|
|
|