Link Posted: Tue May 23, 2017 9:15 pm Post subject: Pioneer (Elite) VSX 49TX overheating (?)
I am an electronics hobbyist (beginner), who happen to find a defective Pioneer (Elite) VSX 49TX, at a good price. The symptom was no sound, except with the multi-channel inputs. It turned out that the reason for this was a DSP problem, specifically cold solder connection at the socket containing the IC504 on DSP3 ASSY. I re-soldered the socket, and now it works.
To the point. The amp section seems to run pretty hot. I measured the temp on the amp heatsink (radiator), it reaches 62-64 degrees Celsius (~144-147 Fahrenheit). It doesnít trigger the temp protection shut down though, it runs OK (so far). By design, this specific unit does not have a fan (Canadian version), unfortunately. I am loading the amp with some no fancy Sony 8 ohms speakers (I mean I donít use low impedance speakers). The temperature seems to be this high almost all the time, irrespective of the volume (but I donít pump up the volume, anyway, living in a condo). The unit has ample space for ventilation, I measured the temperature with the top cover off. Keep also in mind that the output transistors are Power MOSFETS.
Finally, to my question: is this temperature safe, Should I be concerned about the high temperature or is pretty normal for this (kind of) receiver?; should I add an external fan?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum