View previous topic :: View next topic |
Author |
Message |
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Thu Oct 13, 2016 10:04 pm Post subject: NOS LCP 9500 |
|
|
Just picked up NOS 9500 with minty lcp tubes 250.00 chaching chaching
[img][/img]
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
jbltecnicspro
Joined: 23 Apr 2016 Posts: 512
|
Link Posted: Fri Oct 14, 2016 12:21 am Post subject: |
|
|
Congratulations!
|
|
Back to top |
|
|
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Fri Oct 14, 2016 2:06 am Post subject: |
|
|
jbltecnicspro wrote: | Congratulations! |
Thanks looking forward to converting this to an
Ultra and having a new lcp backup to my new 9518lc
Backup to support my 700 hour 9518lc. Nice to be
set for the next 15 years. There is no way I will be going
Back to digital anytime soon.
In 3 new machines and 8 parts machines should be set
for awhile. Modded vim,LVPS,HVPS and neck
Boards,Moome and Ice clear glycol with a D6500 calibration
I feel I will have achieved the ultimate CRT
video experience. I also will add the Oppo 103D pulls all
this together and is a must have.
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4379 Location: Phoenix
|
Link Posted: Fri Oct 14, 2016 8:26 am Post subject: |
|
|
You Dog!!!
LOL nice find.
|
|
Back to top |
|
|
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Mon Oct 17, 2016 7:41 pm Post subject: |
|
|
Tim in Phoenix wrote: | You Dog!!!
LOL nice find. |
Thanks we are gutting the tubes and installing them
In a new chassis. Severe fungus so cutting the tubes
out and transferring them. Fun project and should be done
this week if all goes well.
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Wed Oct 19, 2016 1:36 am Post subject: |
|
|
Surgery complete special gold edition LCP machine
[img][/img]
[img][/img]
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
cmjohnson
Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s
|
Link Posted: Wed Oct 19, 2016 1:54 am Post subject: |
|
|
Please reinstall all the ground straps running across the top plates of the tube covers, as well as the metal neck card shields and the ground straps that span from the neck card shields to the rear heatsink. They're more important than most people realize.
They are NOT optional.
|
|
Back to top |
|
|
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Wed Oct 19, 2016 2:07 am Post subject: |
|
|
Thanks for the concern will get to that as it's
only day 2. Going to mount the GT 17 button
It up and wrap it in plastic and store it for a Rainey
day, Will not fill with glycol until pressed into service
Someday most likey ten years from now or longer.
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
cmjohnson
Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s
|
Link Posted: Wed Oct 19, 2016 2:12 am Post subject: |
|
|
That's wise. I really recommend treating the inside face of the mounting plate with black VHT epoxy and also only use stainless steel screws, which being a newer unit it should already have, at least with regard to anything that can touch glycol.
|
|
Back to top |
|
|
greg9518lc
Joined: 19 Apr 2016 Posts: 360
|
Link Posted: Wed Oct 19, 2016 2:32 am Post subject: |
|
|
My expert CRT guy says these are the good
chambers and apoxy is not needed. This projector
will be the only LCP projector of its kind
_________________ VDC 9518LC modded: I do not sell or promote mods only interested in the best PQ possible......
|
|
Back to top |
|
|
|
|