View previous topic :: View next topic |
Author |
Message |
x-it
Joined: 19 Sep 2016 Posts: 3
|
Link Posted: Mon Sep 19, 2016 6:02 pm Post subject: non-contact mode metering with i1 pro and i1 display 3 |
|
|
Hi all,
I am an enthusiast in color management and calibration. I found over internet and on this forum that people use i1 pro and i1d3 in non-contact modes, but I didn't find any detailed information on non-contact metering setup(distance, angle etc.).
So far I only used meters in "contact" mode directly on the screen(mainly LCD LED/CCFL PC displays), and now I plan to play with few old Sony and Panasonic CRTs and a Samsung LCD LED.
Can somebody shed some light about non-contact metering or point me to a source of information?
Thank you in advance.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17850 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
|
Back to top |
|
|
x-it
Joined: 19 Sep 2016 Posts: 3
|
Link Posted: Mon Sep 19, 2016 8:50 pm Post subject: |
|
|
Thank you on warm welcome,
I have read the whole guide and did a bit more search on the forum.
I found that this thread is also very informative http://www.curtpalme.com/forum/viewtopic.php?t=34923&start=0&postdays=0&postorder=asc&highlight=non+contact
With all that, I believe that if I am to use my meters in non-contact mode for the CRT and LED tvs I plan to play with, I should point them to centre and put them where the Y value will be highest when reading a, let's say, white patch.
Am I correct? Or am I still not understanding.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17850 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
|
Back to top |
|
|
x-it
Joined: 19 Sep 2016 Posts: 3
|
Link Posted: Tue Sep 20, 2016 6:40 pm Post subject: |
|
|
Thank you Kal for help,
Just tested it successfully.
|
|
Back to top |
|
|
|
|