View previous topic :: View next topic |
Author |
Message |
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Mon Sep 05, 2016 12:13 pm Post subject: Disable H Phase on Moome external? |
|
|
Guys
It's one of my customers, the picture randomly jumps sideways ten inches on a ten foot screen width.
Any ideas for this? If we disable the phase adjust it should become stable.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17850 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
Link Posted: Mon Sep 05, 2016 1:54 pm Post subject: |
|
|
Can you tell us more about the setup from source to display and exactly what's being used?
Which of Moome's products is this exactly? A 100% digital HDMI in/HDMI out unit? If yes, I don't see how the Moome box could be randomly causing the picture to jump sideways. It's likely something in the analog domain, in the projector. (I'm assuming it's a CRT projector)
Kal
_________________
Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Mon Sep 05, 2016 3:29 pm Post subject: |
|
|
Okay
It's the Moome external HDMI to RGB device fed by a Kramer HDMI switch with six sources, out of the Moome to a Marquee 9500.
The picture randomly jumps sideways.
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24296 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Mon Sep 05, 2016 3:54 pm Post subject: |
|
|
Dumb question, when the pix jumps sideways, do the test patterns remain within the screen frame?
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Mon Sep 05, 2016 5:02 pm Post subject: |
|
|
Curt Palme wrote: | Dumb question, when the pix jumps sideways, do the test patterns remain within the screen frame? |
That was really dumb! Yes. Certain that the problem is the Moome.
You cannot move test patterns in a Marquee except in convergence.
Last edited by Tim in Phoenix on Mon Sep 05, 2016 9:36 pm; edited 1 time in total
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Mon Sep 05, 2016 5:51 pm Post subject: |
|
|
This was an issue with these boxes and I know I fixed several to stop shifting, but it was years ago. I would send Moome an email and ask him what to do. The fix involves soldering something to another thing
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Mon Sep 05, 2016 5:55 pm Post subject: |
|
|
There is this in the manual too, but custom resolutions (such as blending resolutions) are not memorized. Neither are resolutions like 1080p 72Hz or 818x1920p...
■ H-PHASE ADJUST: (Professional only)
【Step】: (Professional only)
1. Set SW1 #5 at “K” side , #4 at “E” side
2. Press SEL button, you will see the image shift to right, and 10bit LED will
blinking
3. If input resolution changed, like move from 1080P to 720P, please do the step
1, step 2 again
4. shift value will be memorized for each factory defined resolution (list in table 1,
for HDTV, support 50Hz and 60Hz only)
【Notice】:
1. When the image shift to the right limit, the 10bit LED will keep on when press
SEL button, keep press SEL button for more then 2 second, image will
go to the original left side.
2. Shift value will store in memory for each factory default resolution when power
off, and shift value will be loaded at next power on
3. When set on component output mode, the shift will at opposite direction
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Mon Sep 05, 2016 7:22 pm Post subject: |
|
|
Right
The signals are all 1080p/60 at 67khz. We want to Disable the f------ phase adjust, not keep it active. Any ideas for that?
I can solder real good!
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Mon Sep 05, 2016 9:31 pm Post subject: |
|
|
It might work to just delete the h-phase memories.
Set switches 4 & 5 to "K" and then press the "SEL Button."
But I suspect you will need an answer from Moome on how to disable it with a jumper.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
|
|