CurtPalme.com Home Theater Forum

Sparky015 · Last edited by Sparky015 on Wed Jan 04, 2017 6:56 pm; edited 15 times in total

Listing what is left of my projector. Looking to sell the last of the stuff quick. All boards are 100% working. No reasonable offer will be refused. If you want to see any additional pictures, please let me know.

VDM, 50-2350-02P, Convergence 50-2230-01P, & Stig board on Heatsink. Has all cap and resistor mods complete. $50
HDM (not modded) 50-2003-07P Sold
FCM 50-2034-02P Has all cap mods $50
HVPS $75

Not pictured:
FCM 50-2034-02P (This was my spare - stock condition) $25
CLM 50-2036-03P running firmware version 3.4 $35
Color Correction Module Free for the cost of shipping.
MDM Board Free for the cost of shipping.
Remote $20
9" tube assembly top and bottom plates with shields (needed to convert an 8" machine to 9") $40
HV Splitter $10

as00270 · Joined: 30 May 2010 Posts: 17

HI

Would be interested in the hdm board
One question:
You do not have a clm board ? - in fact i do not need the complete clm board - just the astig daughter board would be enough

What would be the price - incl. shipping to Europe?
Thanks in advance

Serge

Sparky015 · Posted: Sun Jul 17, 2016 3:59 pm Post subject:

Sent you a PM!

I've updated what has been sold. Thanks!

Sparky015 · Posted: Wed Jul 27, 2016 11:11 pm Post subject:

Ive been asked by a few about the MPMODs. I've added the pictures of the neck boards, which are matched to the VIM. These mods did wonders to my image.

Sparky015 · Posted: Sat Jul 30, 2016 3:29 pm Post subject:

I have updated what is sold, and now that the projector is completely broken down, I have listed also misc things. If there is anything you need not listed, I still have it. I will wait to toss anything out until the main items are all sold.

Sparky015 · Posted: Sat Aug 13, 2016 2:20 pm Post subject:

Bumping the thread. Prices are well below market value for remaining items. If there is anything you want not listed, I probably still have it. I have not tossed any mechanical parts.

Sparky015 · Posted: Tue Aug 16, 2016 1:39 am Post subject:

Updated what is sold and also listed prices for everything else remaining. If there is anything you need not listed, let me know. I haven't tossed anything yet.

Tim in Phoenix · Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix

Hello

Do fish out the internal wire harness, I think Curt was looking for one. It starts at the power supply bulkhead connectors and spreads out to the chassis.

Sparky015 · Posted: Tue Aug 16, 2016 12:31 pm Post subject:

Thanks Tim. The projector is completely torn down, so I have all the cables together with the motherboard and backplane boards. I will PM Curt to see if he has a need. Thanks!

Sparky015 · Posted: Sun Aug 21, 2016 1:49 am Post subject:

Updated to show prices

Sparky015 · Posted: Wed Aug 31, 2016 4:46 pm Post subject:

bumping this. Really hoping to offload the last parts soon!

cmjohnson · Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s

If Curt doesn't take that wiring harness, I will. It turns out I need another one due to a pinched and broken G2 lead.

Sparky015 · Posted: Tue Sep 13, 2016 4:33 pm Post subject:

I updated the listing to just show what is left. I also have the frame and covers as well, but I plan to throw those away as soon as the remainder of the boards are sold.

Sparky015 · Posted: Thu Dec 29, 2016 7:39 pm Post subject:

Last call for anything left. Trash goes out Sunday evening. I am guessing no takers given you can buy an Ultra chassis for $400 less tubes and covers from Curt, which is an incredible deal. Its been fun guys!

cmjohnson · Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s

I could use the tube covers. Definitely. I'd be interested in some of the other boards but right now I'm so strapped for cash I can't make any short term commitments.

The VDM and HDM would be useful. Heck, for the right price I'd take every board. If I could swing it now. Which I can't.

Ebay sales have NOT been kind to me lately.

Sparky015 · Posted: Sun Jan 01, 2017 3:59 am Post subject:

No tube covers remain. I only have boards left, and I'm not looking to store them. At this point, they get trashed next week if no buyers with cash need them.

racerxnet · Joined: 20 Jun 2007 Posts: 362 Location: Illinois

Sent you a PM for parts.

MAK

Sparky015 · Posted: Fri Jan 06, 2017 7:54 pm Post subject:

MAK, sent you a PM response. Thanks!

racerxnet · Joined: 20 Jun 2007 Posts: 362 Location: Illinois

Another PM sent.

MAK

Sparky015 · Posted: Sun Jan 08, 2017 6:31 pm Post subject:

Mark, PM sent back. Thanks!