OK, I've seen Curt's page on this, but it looks like I missed the boat back in 20012/13. Anyone on here actually use one on their XG and have feedback? _________________ Trust no one. Absolutely no one. Advice of the board.
Joined: 05 Jun 2010 Posts: 2638 Location: Budapest, Hungary
Link Posted: Sat Aug 22, 2015 7:23 am Post subject:
I have a 1st gen. moome card (DVI+component), I only briefly tested that (it just came with the pj). But what I read about them is they are working fine, the only downside is that the XGs are picky for input timings so if you pair the XG with a standard BRay player you'll most likely get the sides of the picture cropped (~20%).
This is why you most likely need a scaler if you plan to use discrete source components, but some lumagen scalers already have analog outputs too. The other way is the HTPC way which also don't require a HDMI input card.
I'd say the moome card is only must if you just want to plug and play -bnut that would mean 1080p-60Hz which is only acceptable to viewing CATV or Dish.
As you see either way with a scaler or HTPC the HDMI card is not a must, using a one of these also bring the oportunity to send proper resolutions for the projector, like 1080p-72Hz. I myself prefer the 1080i-96Hz which is not stressing the projector at all still gives good motion flow and virtually flickerless on the screen.
If you decide to set that XG up, I gladly share my 1080i-96HZ timings -if you are interested- I also use an XG135 LC. _________________ projectors in the past : NEC 6-9PG xtra, Electrohome Marquee 6-7500, NEC XG 1351 LC ( with super modified Electrohome VNB neckboard !!!)
current: VDC Marquee 9500LC
The MOD: VNB-DB
Joined: 28 Sep 2006 Posts: 2643 Location: Fond du Lac, WI
Link Posted: Sun Sep 13, 2015 6:09 am Post subject:
I've actually been thinking about setting my XG110AC up again just to enjoy some of that sweet CRT'ness that I miss on the big screen (digital is great, but I can't resist the analog!). So its nice to see a thread on this, since I have the DVI + component card and actually rarely used it (mostly due to not having any way to properly set the timings until I got a video processor)
Mine didn't like to cooperate much, but again I suspect that is a fault of how I was running things. Glad I still have it since I doubt I'll ever come across the HDMI card (or use it!) _________________ When I'm asking for a Model number, that doesn't mean I'm asking for a nude photo with your number on it
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum