View previous topic :: View next topic |
Author |
Message |
redfox001
Joined: 16 Mar 2009 Posts: 2251 Location: The Netherlands
|
Link Posted: Wed Oct 08, 2014 9:51 am Post subject: |
|
|
CasetheCorvetteman wrote: | Press zero on the remote. |
No I mean by removing some resistors. What resistors or what connections?
_________________ 701s->runco933->8500ultra->hd1->hd350->vw100->cinemax+919sp+3x919+9500mp->cinemax+919sp(modded)+kuro600a
|
|
Back to top |
|
|
CasetheCorvetteman
Joined: 09 Nov 2008 Posts: 6319 Location: Australia
|
Link Posted: Wed Oct 08, 2014 11:40 am Post subject: |
|
|
Never heard of that.
_________________ Barco CineMAX, 120" OZ Theatre Majestic 16:9 screen, H/K AVR 7.1...
RUNCO DTV991 LC ( NEC XG 852 LC ) 100" 4:3 screen, H/K AVR 5.1...
|
|
Back to top |
|
|
stridsvognen Guest
|
Link Posted: Wed Oct 08, 2014 2:43 pm Post subject: |
|
|
redfox001 wrote: | stridsvognen wrote: | CasetheCorvetteman wrote: | I wound it all the way anti clockwise , nothing changed |
Im quite sure it do, but you need to meassure it, dobt you will be able to detect by eye.
I always deactivate the gama section of the card.
Do you have a pic of your card, from the inside, so i can see the print layout.? |
How do you deactivate the gamma? I would like to try that too. |
No idea where those resistors are on the EXT V3.
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Mon Oct 20, 2014 8:35 pm Post subject: |
|
|
Case, to get your contrast correct again set the EXT to 16-235 and run a white window into the HDMI at 100 IRE. Make sure the source is also outputting luma in range 16-235. You can use a test Bluray or a pattern generator.
Connect your oscilloscope to the GREEN RGB output and measure the p-p voltage. Adjust contrast such that the p-p is 0.7 volts.
If you send me a photo of the front and back of the EXT I can tell you what to pull off to disable gamma.
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
redfox001
Joined: 16 Mar 2009 Posts: 2251 Location: The Netherlands
|
Link Posted: Fri Oct 31, 2014 1:36 pm Post subject: |
|
|
This is the external Moome v3. Can you tel how to disable the gamma on this one? The top yellow wires go to blue gamma and contrast pots.
_________________ 701s->runco933->8500ultra->hd1->hd350->vw100->cinemax+919sp+3x919+9500mp->cinemax+919sp(modded)+kuro600a
|
|
Back to top |
|
|
|
|