Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]

 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

60hz Flicker

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products
View previous topic :: View next topic  
Author Message
00antstaines




Joined: 29 May 2012
Posts: 1



PostLink    Posted: Tue May 29, 2012 4:49 pm    Post subject: 60hz Flicker Reply with quote


        Register to remove this ad. It's free!
Hi, i have the VIP 3D displayer connected to a 60hz LCD TV that works great at night, but it is unusable during the day because of the flickering of my room, from what i understand at 60hz it is flickering in time with the screen L-R-L-R-L-R, wouldn't it eliminate the flicker if the glasses were running at 120hz and doing L-L-R-R-L-L-R-R, which would still be in sync with the display?

and one more thing, i'm one of the unlucky ones that get a frame locking issue, according to my tv manual at 1280x720 my tv doesn't run exactly 60hz it's actually 59.855hz the only resolution to get 60hz exactly is the native 1920x1080, is it a hardware limitation that wont allow this resolution or will the 3D VIP be able to support it in a future firmware update?

Thanks (Samsung LE32B550)
Back to top
kal
Forum Administrator



Joined: 06 Mar 2006
Posts: 17849
Location: Ottawa, Canada

TV/Projector: JVC DLA-NZ7


PostLink    Posted: Tue May 29, 2012 9:05 pm    Post subject: Reply with quote

Hi!

Your questions are more about the inner hardware workings of the 3D-Displayer and possible future updates. I'm afraid those are things that we don't know much about (especially what future updates may or may not be released). Only the manufacturer would be aware of these. You may want to try sending them a note. They're at 3d-vip.com. They usually don't monitor this forum so you'll most likely get a faster response if you contact them directly.

Kal

_________________

Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
Back to top
View user's photo album (18 photos)
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> 3D Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum