View previous topic :: View next topic |
Author |
Message |
paulv44
Joined: 17 Apr 2015 Posts: 2 Location: New Smyrna Beach, FL
TV/Projector: Samsung HL67a750
|
Link Posted: Mon May 18, 2015 7:07 pm Post subject: Meter Correction Module |
|
|
Received my Display 3 Pro kit, with the Certificate of Calibration.
Are these figures to be plugged in to the correction module?
I tried, and my readings are off.
Obviously I am doing something wrong. Do you have a procedure for using the Calibration Corrections?
Thanks.
|
|
Back to top |
|
|
kal Forum Administrator
Joined: 06 Mar 2006 Posts: 17860 Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
Link Posted: Mon May 18, 2015 7:36 pm Post subject: |
|
|
The offsets are built right into your ChromaPure meter licence. There is no need to enter anything. The Certificate of Calibration simply shows you how far off the original stock X-Rite i1Display Pro meter was (shown separately for the 10+ different display types for which ChromaPure compensates). In theory you could take these values and use them in other software too.
The certificate looks like this:
Good luck and happy calibrating!
Kal
_________________
Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
|
|
Back to top |
|
|
paulv44
Joined: 17 Apr 2015 Posts: 2 Location: New Smyrna Beach, FL
TV/Projector: Samsung HL67a750
|
Link Posted: Tue May 19, 2015 2:41 am Post subject: |
|
|
Ah. So the corrections are baked into the software via my license, correct?
|
|
Back to top |
|
|
TomHuffman
Joined: 01 Jun 2010 Posts: 76 Location: Springfield, MO
|
|
Back to top |
|
|
|
|