Return to the CurtPalme.com main site CurtPalme.com Home Theater Forum
A forum with a sense of fun and community for Home Theater enthusiasts!
[ Products for Sale ] [ FAQ: Hooking it all up ] [ CRT Primer/FAQ ] [ Best/Worst CRT Projectors List ] [ Setup Tips & Manuals ] [ Advanced Procedures ] [ Newsletters ]
 
Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist  Photo AlbumsPhoto Albums  RegisterRegister 
 MembershipClub Membership   ProfileProfile   Private MessagesPrivate Messages   Log inLog in 
Blu-ray disc release list and must-have titles. Buy the latest and best Blu-ray titles to show off in your home theater!

Moome EXT V3 - Component out cable?

 
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Moome Products
View previous topic :: View next topic  
Author Message
sk3467



Joined: 17 Jun 2011
Posts: 4
PostLink    Posted: Tue Jun 28, 2011 1:42 pm    Post subject: Moome EXT V3 - Component out cable? Reply with quote

        Register to remove this ad. It's free!
I am trying to figure out if a common VGA to Component cable will work with the Moome EXT-V3. I'm attempting to go HDMI in from an Oppo-BDP93, and go out component to a video switcher capable of 1080i59.94.

Most reviews of cables report people not being able to use them to go from VGA to component, only component to VGA, with others reporting that you need an additional 'transcoder' to get the signal to work properly--as it only sends RGB.

Is anyone successfully using the component out function (YPrPb) on the Moome EXT-V3? Would any of these cables work?

--

http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10235&cs_id=1023503&p_id=2409&seq=1&format=4#feedback

http://www.bhphotovideo.com/c/product/371903-REG/Comprehensive_VGA15P_3RCA_3HR_HR_Pro_Series_VGA.html

--

Thanks for your help.
Back to top
Ron W



Joined: 07 Aug 2009
Posts: 362
Location: Mississauga


PostLink    Posted: Tue Jun 28, 2011 3:48 pm    Post subject: Re: Moome EXT V3 - Component out cable? Reply with quote
sk3467 wrote:
I am trying to figure out if a common VGA to Component cable will work with the Moome EXT-V3. I'm attempting to go HDMI in from an Oppo-BDP93, and go out component to a video switcher capable of 1080i59.94.

Most reviews of cables report people not being able to use them to go from VGA to component, only component to VGA, with others reporting that you need an additional 'transcoder' to get the signal to work properly--as it only sends RGB.

Is anyone successfully using the component out function (YPrPb) on the Moome EXT-V3? Would any of these cables work?

--

http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10235&cs_id=1023503&p_id=2409&seq=1&format=4#feedback

http://www.bhphotovideo.com/c/product/371903-REG/Comprehensive_VGA15P_3RCA_3HR_HR_Pro_Series_VGA.html

--

Thanks for your help.


I am not exactly sure where those reviews originated(because they are nonsense), I have and still use a VGA to component cable on BOTH the Moome and Fury products and they work fine on my component video switcher without a hitch. Just make sure(and it looks like it is) that the VGA is the "male" end of the connector to fit the Moome, otherwise there shouldn't be any problems. Also confirm the RGB/YPrPb switch is set to YPbPr on the Moome, the conversion is already being done within the Moome converter, no need for a transcoder.
Back to top
sk3467



Joined: 17 Jun 2011
Posts: 4
PostLink    Posted: Tue Jun 28, 2011 3:50 pm    Post subject: Reply with quote
Excellent, that's what I was hoping. Thank you for your prompt reply!
Back to top
Display posts from previous:   
Post new topic   Reply to topic   Printer-friendly view    CurtPalme.com Forum Index -> Moome Products All times are GMT
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum