View previous topic :: View next topic |
Author |
Message |
RLM
Joined: 04 Jul 2012 Posts: 2
|
Link Posted: Wed Jul 04, 2012 3:57 pm Post subject: How to use Plasma Picture Controls with Software |
|
|
I own a professional Panasonic Plasma TH-65PF12UK that I have been trying for about two years to get the picture right.
I am considering purchasing the Eye One with Chroma Pure auto adjust to calibrate the Plasma.
I am having difficulty understanding how I use all the Plasma Picture controls with these products. How can something auto calibrate without me actually physically setting the controls. This Plasma has many picture controls including advanced.
I am sorry I don't understand how I would set the meter on the screen, load the software on my windows XP laptop, and set all the plasma controls.
Can someone help me understand the process and how all the equipment works together to get the Plasma Picture looking good.
Thank you,
|
|
Back to top |
|
|
TomHuffman
Joined: 01 Jun 2010 Posts: 76 Location: Springfield, MO
|
|
Back to top |
|
|
RLM
Joined: 04 Jul 2012 Posts: 2
|
Link Posted: Wed Jul 04, 2012 5:07 pm Post subject: |
|
|
So if the Plasma Display is not changed how is the picture calibrated?
The One Eye Sensor sits in front of the display on a dangle or tripod and I assume senses the picture from the Plasma. The sensor is connected to the PC via USB port. The PC has the Chroma Software to work with the One Eye Sensor. Is there a wired connection to the Plasma?
Are you saying there is a connection to the Plasma Display via a re-232 connection that auto sets the setting inside the Plasma.
I am sorry I am not picking this up, but for some reason I am not getting it.
I don't understand how the picture gets calibrated if the setting on the Plasma are not adjusted.
|
|
Back to top |
|
|
TomHuffman
Joined: 01 Jun 2010 Posts: 76 Location: Springfield, MO
|
|
Back to top |
|
|
CIR Engineering
Joined: 25 Aug 2008 Posts: 4264 Location: Chicago USA & Berlin Germany
|
Link Posted: Wed Jul 04, 2012 8:26 pm Post subject: |
|
|
I think the confusion may be that the poster does not have a video processor Tom.
Am I right?
craigr
_________________ *NEW JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
X-Rite i1Pro2 Spectroradiometer & Spyder Colorimeters *For JVC auto-calibration when Klein & Jeti are not applicable
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
*NEW Light Illusion ColourSpace XPT Version β Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
*NEW OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
Back to top |
|
|
TomHuffman
Joined: 01 Jun 2010 Posts: 76 Location: Springfield, MO
|
|
Back to top |
|
|
|
|