View previous topic :: View next topic |
Author |
Message |
aenglish
Joined: 21 Jan 2009 Posts: 78
TV/Projector: Barco BG808s (2002 build)
|
Link Posted: Thu Mar 12, 2009 5:51 pm Post subject: Moome Marquee DVI card |
|
|
I just revieved a Marquee VIM, Rev 1.12. I think the card is self explanitory, but I was looking for a manual or at the very least an explanation of the jumpers. I found one post that said J1 open and J2 closed for M8xxx/M9xxx. I just want to confirm this before pluggin it in as I don't want to blow up the VIM.
Alan
_________________ There are 10 kinds of people in the world, those who get binary and those who don't.
|
|
Back to top |
|
|
draganm
Joined: 08 Mar 2006 Posts: 8990 Location: Colorado
|
Link Posted: Thu Mar 12, 2009 6:53 pm Post subject: |
|
|
yeah you want the jumper on J2. I have the original tech. bulletin drawing at home and it says J2 closed. In the olden days a bunch of these were shipped with jumper on J1 and VIMs got damaged.
|
|
Back to top |
|
|
moome
Joined: 01 Jun 2007 Posts: 497
|
Link Posted: Fri Mar 13, 2009 4:50 am Post subject: Re: Moome Marquee DVI card |
|
|
aenglish wrote: | I just revieved a Marquee VIM, Rev 1.12. I think the card is self explanitory, but I was looking for a manual or at the very least an explanation of the jumpers. I found one post that said J1 open and J2 closed for M8xxx/M9xxx. I just want to confirm this before pluggin it in as I don't want to blow up the VIM.
Alan |
hi:
adjust before pluggin
thanks
Moome
|
|
Back to top |
|
|
|
|