| View previous topic :: View next topic |
| Author |
Message |
Fredrik
Joined: 03 Jul 2007
Posts: 49
Location: Stockholm
|
 Link Posted: Wed Feb 11, 2009 10:03 pm Post subject: Strange measurements from a Barco808 |
 |
|
Ok,
So I've calibrated my LCD TV (as far as the controls on it allowed) following the "Dummies" guide.
Tonight I started with measuring my 808 and measured for the "peak" Luminance to make sure the meter was positioned correctly. Using the 100 IRE pattern, windowed.
Now, the problem is that I get a 80 ftL measurement 
Don't think that is quite right from a CRT PJ.
To get down to 12-15ftL the B808 contrast/brightness controls are at the 10-20 range.
Or move the meter 10-20" from the screen.
When looking at the individual primaries the green and blue is steady at 70% but red is like 300%.
The source is a HTPC->DVI->HDFury->Port3, in this session I used the .iso from the HCFR website.
I rechecked on the LCD TV and the primaries are steady at around 100% except for blue (90%), was not possible to get it better with the normal TV controls.
Using the same .iso but different source equipment.
Anyone know were to start troubleshooting ? 
|
|
| Back to top |
|
 |
Zebu Fellenz
Joined: 21 Dec 2006
Posts: 2567
|
| Link Posted: Wed Feb 11, 2009 10:04 pm Post subject: |
|
|
|
What meter?
|
|
| Back to top |
|
|
Fredrik
Joined: 03 Jul 2007
Posts: 49
Location: Stockholm
|
| Link Posted: Wed Feb 11, 2009 10:05 pm Post subject: |
|
|
Ahh, sorry, I knew I missed something.
It's a Spyder2, using HFCR.
|
|
| Back to top |
|
|
Fredrik
Joined: 03 Jul 2007
Posts: 49
Location: Stockholm
|
| Link Posted: Fri Feb 13, 2009 6:22 pm Post subject: |
|
|
Got a tip from avsforum, tried using the CRT setting instead of LCD (as the guide states).
Now the levels seems to be more normal than before.
|
|
| Back to top |
|
|
|
|
Forum FAQ
Search
Memberlist
Photo Albums
Register
Profile
Private Messages
Log in
