greatfoxmusic
Joined: 25 Jan 2009 Posts: 1
|
Link Posted: Sun Jan 25, 2009 3:57 am Post subject: Eye One and red gain issue |
|
|
Hello all,
I would like to see if anyone here has had problems with the eye1 LT and HCFR software when it comes to red gain.
I have a new eye-1 meter running the latest HCFR and the latest driver from Xrite. It is reading the red channel way low. Low enough so when I set the red gain on my projector to where all 3 colors are at 100%, the white is very obviously pink.
I tried all of the color modes on the Epson, including the torch day modes.
This suggests to me that the eye-1 I got is defective. Anyone else?
By the way the calibration for dummies is fantastic.
I have read through AVS forums on this problem with the red, but I am asking here as well. The people on the AVS don't seem to have solved it.
I am using Epson 1080 Pro UB, Yamaha RX-V663 and Panasonic BD-30.
Thanks
--Todd
|
|