CurtPalme.com Home Theater Forum

garyfritz · Joined: 08 Apr 2006 Posts: 12026 Location: Fort Collins, CO

WanMan · Joined: 19 Mar 2006 Posts: 10273

wkosmann · Posted: Fri Nov 21, 2008 7:23 pm Post subject:

VideoGrabber · Joined: 09 Apr 2006 Posts: 933 Location: Michigan

WanMan,
> All I am saying is... <

Yeah, I knew that. Hopefully you didn't feel I was poking fun at your expense. Just a silly mood.

wkosmann · Posted: Mon Nov 24, 2008 3:04 pm Post subject: The Material Is In The House

Dear All;

The Flockstar light control roll of material is in the house. The previous owner had sold 20 yards of the material earlier this week. Today I paid for and picked up the other 80 yards. (The previous owner only lived an hour and a half away.) I need 20 yards for my Home Theater. That leaves a maximum of 60 yards (180 feet) available for you guys. The table below summarizes who has spoken for what. It is now time to confirm what you want, and to Paypal me the funds.

Ecrabb, if you would like some, now is the time to state how much. Clarence, please specify the size of the chunk you want. Kal and VideoGrabber, please tell me if you would like 10 feet or 20 feet each.

Material cost is $3.6 x length in feet. Total cost is material cost + shipping.

I would to request payment, now, via Paypal (maplecroft@verizon.net) for the material cost (not the shipping cost). Please provide your mailing address with payment. As I receive payment, I will tube up the material, mail it, let each of you know how much the mailing cost was, and request payment for the mailing costs, again via Paypal. Clarence, you are welcome to come down and pick up your chunk, or I will mail it to you if you prefer.

William

Nashou66 · Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY

Mine is confirmed.

Athanasios

**AnalogRocks** · Posted: Mon Nov 24, 2008 3:19 pm Post subject:

Hi William, I'll paypal the money today.

Jeremy

Belcherwm · Posted: Mon Nov 24, 2008 5:18 pm Post subject:

William,

I'd like to get 15' if you are still taking orders. Timing is great on this.

wkosmann · Posted: Mon Nov 24, 2008 8:21 pm Post subject:

Hi Bill;

Long time no hear. I still have 50 feet available, so you may have 15 feet of it if you would like. Please paypal me $54.00 to maplecroft@verizon.net. Like Clarence, you have the option to just drive by and pick the material up. I am off all this week, so any day would be fine. Besides, it would give me an excuse to show off the Home Theater. Smile

On the other hand, if you prefer, I can mail the material to you.

William

Belcherwm · Posted: Mon Nov 24, 2008 8:30 pm Post subject:

We're leaving for NC on Wednesday (real early!). I'd be glad to come by and pick it up and see how things are going. Let me see if I can clear some time tomorrow.

**AnalogRocks** · Posted: Mon Nov 24, 2008 8:45 pm Post subject:

Payment sent

Clarence · Posted: Mon Nov 24, 2008 11:36 pm Post subject: Re: The Material Is In The House

Belcherwm · Posted: Wed Nov 26, 2008 2:19 am Post subject:

Payment sent. Will arrange a time to come by after Thanksgiving week.

Nashou66 · Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY

I decided on 20 feet, paymnet sent.

Athanasios

**kal** · Posted: Fri Nov 28, 2008 7:23 pm Post subject:

I just paid for 10' worth (36$). That's good enough for now. Thanks!

Kal

wkosmann · Last edited by wkosmann on Tue Dec 02, 2008 3:30 am; edited 1 time in total

Gentlemen;

Following is the status of your Flockstar light control material orders:

Material cut, waiting for pickup:

Bill Belcher

Material cut, tubed, and shipped:

Gary Fritz
Kevin Dew
Jeremy Rice

Material cut, tubed, and about to be shipped on Monday:

Athanasious
Kal

People who expressed interest, but I have not heard from:

Ecrabb
Larry K.
Videograbber
Keldor
Clarence

There are 18 feet left at this point. I have been cutting material as people have paid. First to pay gets part or all of the 18 feet left.

William

wkosmann · Posted: Mon Dec 01, 2008 10:56 pm Post subject: New Current Status

Gentlemen;

Following is the status of your Flockstar light control material orders:

Material cut, waiting for pickup:

Bill Belcher

Material cut, tubed, and shipped:

Gary Fritz
Kevin Dew
Jeremy Rice
Athanasious
Kal

People who expressed interest, but I have not heard from:

Ecrabb
Larry K.
Videograbber
Keldor
Clarence

There are 18 feet left at this point. I have been cutting material as people have paid. First to pay gets part or all of the 18 feet left.

William

Kevin D · Joined: 23 Nov 2007 Posts: 63

Received mine today! Looks nice...

Thanks!

Kevin D.

**AnalogRocks** · Posted: Tue Dec 02, 2008 1:56 am Post subject:

Sweet, shipping paid today. Look forward to it! Thanks William.

wkosmann

Over the Thanksgiving week, 3 of us (myself, my youngest son and his grandfather) put up 30 yards of the Flockstar material in the Home Theater. Three lengths of 10 yards (each side wall is 7.5' high, with the ceiling 15' wide) were installed over parts of 2 days. We started from each corner behind the screen, and worked our way out. Boy this stuff is dark. The 12' wide image on the screen looks like it is suspended in air. Absolute black all around the image!!! Neat upgrade to the HT.

Thanks to everyone who purchased the material I did not use, and helped to keep my cost reasonable. I hope this stuff will be as useful to you as it has been to me.

William