Hello community, I am currently struggling with the G2 settings for my Barco Data 801s. To my knowledge there is a certain grid voltage. Can someone help me. The recommendations for the G2 setting stored on the Barco do not work. And so I want to set the voltage with a meter. How many volts should I set there. Thanks in advance for any helpful answer. Greetings
Link Posted: Tue Jan 24, 2023 9:55 am Post subject:
You cannot know which voltage will be the good setting, it depends of the tube itself (and it's wear), that's why it's a setting in fact.
(beware also it's in the 400 - 1000V range).
What you can do is disabling the ABL (automatic black level) then adjust the G2 by eye, to bring the raster barely visible.
Also, if your tube is really worn, you may not be able to find a good setting.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum