View previous topic :: View next topic |
Author |
Message |
johey
Joined: 07 Aug 2022 Posts: 10 Location: Södertälje, Sweden
|
Link Posted: Sun Aug 07, 2022 5:54 pm Post subject: Electrohome ECP 3500 svhs/composite not working |
|
|
I have an Electrohome ECP 3500 with the SVHS STANDARD MULTI DECODER input card installed. Unfortunately, I don't seem to get any picture of that. When I give it a source, the screen reacts like it is about to display something, but then just turns black. Same behaviour on svhs and composite on both channels. It's installed in slot 1. In slot 0 I have the dual RGBHV board which functions correctly.
I suspect the input board to be faulty, but I don't know for sure. Just asking for any hint. Maybe anyone here has a spare card to sell, or some other nifty idea?
|
|
Back to top |
|
|
johey
Joined: 07 Aug 2022 Posts: 10 Location: Södertälje, Sweden
|
Link Posted: Thu Aug 18, 2022 9:47 am Post subject: |
|
|
Also, obviously, if anyone happens to have a spare service manual (or preferably a link to where I can download one) of the SVHS STANDARD MULTI DECODER board, I'd be annoyingly happy for one.
|
|
Back to top |
|
|
Tim in Phoenix
Joined: 21 Oct 2006 Posts: 4378 Location: Phoenix
|
Link Posted: Sat Aug 20, 2022 1:40 am Post subject: |
|
|
Seriously?
Manuals for 1985 equipment? Get a line doubler and cable it to RGB. I have an early Lumagen unit here, PM me if interested.
Tim at E-Tech Scottsdale
|
|
Back to top |
|
|
johey
Joined: 07 Aug 2022 Posts: 10 Location: Södertälje, Sweden
|
Link Posted: Mon Aug 22, 2022 8:03 am Post subject: |
|
|
Oh, well, I have service manuals for older equipment than this. Thanks for the offer, but I am more into the idea of getting the board fixed (if it's even broken in the first place).
|
|
Back to top |
|
|
|
|