View previous topic :: View next topic |
Author |
Message |
scotha
Joined: 27 Mar 2006 Posts: 167 Location: Lilburn, Ga.
|
Link Posted: Tue Dec 22, 2020 7:45 pm Post subject: barco graphics 1208 |
|
|
Hey guys, I am having problems with my 1208. It has started taking about 20 minutes of warm up time before it will show an image, once it comes on it looks great. Now it has stopped responding to the built in controller, the only button that works is the STBY to power on no other controls work STBY only works to power on it will not power off I have to use the main power button to shut it off. Also about every 3 or 4 minutes a message stating "invalid key entry" appears in the lower right corner for a few seconds without any remotes being touched or buttons being pushed. Has my main controller crapped out on me? Thanks for any help.
_________________ pj. BD808s, BD801s
|
|
Back to top |
|
|
Curt Palme CRT Tech
Joined: 08 Mar 2006 Posts: 24296 Location: Langley, BC
TV/Projector: All of them!
|
Link Posted: Tue Dec 22, 2020 9:44 pm Post subject: |
|
|
Sounds like the buttons on the remote are sticking/built in keypad. You either need to clean them with DeOxIt, or pull the keypad membrane out, and coat the black contacts with silver conductive paint (available on eBay)
|
|
Back to top |
|
|
scotha
Joined: 27 Mar 2006 Posts: 167 Location: Lilburn, Ga.
|
Link Posted: Wed Dec 23, 2020 6:34 pm Post subject: |
|
|
Thanks Curt! I removed the built in controller and powered up with the remote, all my symptoms are gone. Thanks again!
_________________ pj. BD808s, BD801s
|
|
Back to top |
|
|
|
|